HP Hewlett Packard 7540 User Manual

User Guide  
75, 705, 7540, 7600 and 7650  
Series 17” CRT Monitors  
Document Part Number: 368239-005  
January 2006  
This guide provides information on setting up the monitor,  
installing drivers, using the on-screen display menu,  
troubleshooting, regulatory notices, and technical specifications.  
Removing the Monitor Base . . . . . . . . . . . . . . . . . . . 3–2  
Connecting the Speakers (Available with Select Models) 3–4  
Software and Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
The Information File . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
The Image Color Matching File . . . . . . . . . . . . . . . . 4–2  
Installing the .INF and .ICM Files . . . . . . . . . . . . . . . . . . 4–2  
Installing from the CD. . . . . . . . . . . . . . . . . . . . . . . . 4–2  
Downloading from the Worldwide Web . . . . . . . . . . 4–3  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4  
User Guide  
1
Contents  
On-Screen Display Functions . . . . . . . . . . . . . . . . . . 4–6  
Using the Energy Saver Mode . . . . . . . . . . . . . . . . . . . . 4–10  
A Troubleshooting  
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . A–1  
Preparing to Call Technical Support . . . . . . . . . . . . . . . . A–4  
B Technical Specifications  
75 and 7540 Series 17”  
Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2  
European Union Regulatory Notice. . . . . . . . . . . . . . . . . C–3  
Disposal of Waste Equipment by Users in Private Household  
in the European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–5  
Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–5  
Japanese Power Cord Requirements . . . . . . . . . . . . . C–6  
2
User Guide  
1
Product Features  
This color monitor is digitally controlled by the  
microprocessor-based computer. It provides an easy to use  
on-screen display menu technology that allows you to adjust the  
monitor to your specific viewing needs.  
The 17-inch/43-centimeter CRT monitor features include:  
16” (41 cm) viewable area display.  
1024 x 768 @85 Hz recommended resolution.  
Tilt and swivel base.  
Monitor AC power cord (available with select models).  
VGA analog signal cable included.  
Speakers and power adapter (available with select models).  
User Guide  
1–1  
   
Product Features  
Plug and play capability if supported by your system.  
On-screen display (OSD) adjustments for ease of setup and  
screen optimization; allows you to adjust all elements of the  
screen image.  
Energy Saver feature to meet requirements for reduced power  
consumption.  
Compliant with the following regulated specifications:  
European Union CE Directive  
Swedish MPR II (available with select models)  
Swedish TCO ‘03 (available with select models)  
User documentation  
1–2  
User Guide  
2
Safety and Maintenance  
Guidelines  
Safety Guidelines  
Power Requirements  
A power cord is included with your monitor. If another cord is  
used, use only a power source and connection appropriate for this  
monitor. For information on the correct power cord set to use with  
your monitor, refer to the “Power Cord Set Requirements” section  
in Appendix C.  
Important Safety Information  
WARNING: To reduce the risk of electric shock or damage to your  
Å
equipment, do not disable the power cord grounding feature. This  
equipment is designed to be connected to a grounded (earthed)  
power outlet that is easily accessible to the operator. The grounding  
plug is an important safety feature.  
WARNING: For your safety, be sure that the power outlet you plug  
Å
the power cord into is easily accessible and located as close to the  
equipment as possible. When you need to disconnect the power to  
the equipment, unplug the power cord from the power outlet by  
grasping the plug firmly. Never pull on the cord.  
User Guide  
2–1  
         
Safety and Maintenance Guidelines  
CAUTION: For the protection of your monitor, as well as your  
Ä
computer, connect all power cords for your computer and its  
peripheral devices (such as a monitor, printer, scanner) to some form  
of surge protection device such as a power strip or Uninterruptible  
Power Supply (UPS). Not all power strips provide surge protection;  
the power strips must be specifically labeled as having this ability.  
Use a power strip whose manufacturer offers a Damage Replacement  
Policy so you can replace your equipment if surge protection fails.  
Maintenance Guidelines  
To enhance the performance and extend the life of your monitor,  
follow these guidelines:  
Do not open your monitor cabinet or attempt to service this  
product yourself. If your monitor is not operating properly, or  
has been dropped or damaged, first unplug from power outlet,  
then contact your Hewlett-Packard authorized dealer, reseller,  
or service provider.  
Adjust only those controls that are discussed in the operating  
instructions.  
Place your monitor at least 3 inches (76 mm) away from  
walls or other enclosures.  
Use only a power source and connection appropriate for this  
monitor, as indicated on the label/back plate of the monitor.  
Be sure the total ampere rating of the products connected to  
the outlet does not exceed the current rating of the electrical  
outlet, and the total ampere rating of the products connected  
to the cord does not exceed the rating of the cord. Look on the  
power label to determine the ampere rating (AMPS or A) for  
each device.  
2–2  
User Guide  
 
Safety and Maintenance Guidelines  
Install your monitor near an outlet that you can easily reach.  
Disconnect the monitor by grasping the plug firmly and  
pulling it from the outlet. Never disconnect the monitor by  
pulling the cord.  
Turn your monitor off when not in use. You can substantially  
increase the life of your monitor by using a screen saver  
program and turning off the monitor when not in use.  
Unplug your monitor from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp  
cloth for cleaning. If the screen requires additional cleaning,  
use an antistatic CRT screen cleaner.  
CAUTION: Do not use benzene, thinner, ammonia, or any other  
volatile substances to clean your monitor or the screen. These  
chemicals may damage the cabinet finish as well as the screen.  
Ä
Slots and openings in the cabinet are provided for ventilation.  
These openings must not be blocked or covered. Never push  
objects of any kind into cabinet slots or other openings.  
Do not place plants on top of your monitor. Water or dirt from  
the plant may get into the vents.  
Do not drop your monitor or place it on an unstable surface.  
Do not allow anything to rest on the power cord. Do not walk  
on the cord.  
Keep your monitor in a well-ventilated area, away from  
excessive light, heat or moisture. Keep your monitor away  
from high-capacity transformers, electric motors, and other  
devices with strong magnetic fields.  
In a two-monitor system, place your monitors as far apart  
from one another as possible to lessen interference between  
them.  
User Guide  
2–3  
Do not place the monitor face down. Damage could result to  
the front panel controls or the monitor screen.  
2–4  
User Guide  
 
3
Setting Up the Monitor  
Attaching the Monitor Base  
1. Carefully position the monitor bottom side up.  
2. Align the hooks on the base with the sockets on the bottom of  
the monitor and attach the base.  
3. Push the base toward the front of the monitor until it stops.  
User Guide  
3–1  
     
Setting Up the Monitor  
Removing the Monitor Base  
In the event that you need to disassemble the base from the  
monitor, position the monitor bottom side up and follow these  
instructions:  
1. If you must remove the base attachment, release the catch and  
slide the base toward the back of the monitor.  
2. Lift the base up and away from the monitor.  
Connecting the Cables  
Before setting up the monitor, place it in a convenient,  
well-ventilated location near the computer.  
1. Turn off the power to the computer and other peripheral  
devices.  
2. Connect the power cord 1 to the back of the monitor, then  
connect the power cord to a power outlet.  
3. Connect the video cable (blue connector) 2 from the back of  
the monitor to the blue 15-pin connector on the back of the  
computer. Tighten the cable screws to secure the cable to the  
connector.  
CAUTION: To avoid damaging the video cable, ensure that the  
Ä
cable aligns with the 15-pin connector. Do not force the cable onto  
the connector.  
3–2  
User Guide  
   
Setting Up the Monitor  
4. Power on the computer and monitor.  
If the monitor fails to function properly, refer to Appendix A,  
“Troubleshooting.”  
5. If necessary, adjust the front panel monitor controls  
according to your personal preference. See Chapter 4, “Front  
Panel Controls” for detailed information.  
The monitor installation is now complete.  
User Guide  
3–3  
Setting Up the Monitor  
Connecting the Speakers (Available  
with Select Models)  
Several speaker models are available with select monitors. Refer  
to the steps below for the speaker model included with your  
monitor.  
Tall Speakers with Base  
1. If the speakers and bases are not assembled, attach them by  
turning each speaker bottom side up. With the opening in the  
base toward the rear of the speaker, align the key slot on the  
base with the center tab on the speaker, and then lower the  
base onto the speaker.  
2. Place the speaker set near the monitor so that the speaker with  
the controls is on the right side when you view the monitor  
from the front.  
3–4  
User Guide  
   
Setting Up the Monitor  
3. Attach the green connector from the control speaker to the  
green port on the back of the computer.  
4. Attach the speaker power adapter cable to the connector on  
the back of the control speaker, and then plug the AC adapter  
into an electrical outlet.  
5. Use the control knob A to turn on the speakers and adjust  
volume.  
6. If you are using a subwoofer, insert the subwoofer audio plug  
into the speaker’s subwoofer connector B.  
7. As needed, connect headphones to the headphone jack  
connector (not shown) on the right control speaker.  
User Guide  
3–5  
Setting Up the Monitor  
Short Speakers  
1. Place the speaker set near the monitor so that the speaker with  
the controls is on the right side when you view the monitor  
from the front.  
2. Attach the speaker power adapter cable to the black  
connector on the back of the control speaker, then connect the  
AC adapter into an electrical wall outlet.  
3. Attach the green connector from the control speaker to the  
green port on the back of the computer.  
4. Turn on the speakers and adjust the volume using the knob on  
the side of the control speaker.  
3–6  
User Guide  
 
Setting Up the Monitor  
USB Speakers  
1. Place the speaker set near the monitor so that the speaker with  
the controls is on the right side when you view the monitor  
from the front.  
2. Plug the USB cable 1 on the control speaker into a USB port  
on the computer.  
3. If available, plug the green connector (audio connector) 2 on  
the control speaker into the green port on the computer.  
The audio cable is available with select speaker models.  
User Guide  
3–7  
 
Setting Up the Monitor  
Plugging Headphones into the  
Computer  
To use headphones, if your speaker does not have a headphone  
port, plug them into the connector on the back of the computer  
labeled Out, Line Out or Speaker. You may need to disconnect the  
speakers to connect the headphones.  
3–8  
User Guide  
 
4
Operating the Monitor  
Software and Utilities  
Select monitor models will include a CD that contains two files  
you can install on your computer:  
an .INF (Information) file  
an .ICM (Image Color Matching) file  
Adobe Acrobat Reader is supplied on this CD and can be  
installed from the menu.  
If the monitor does not include a CD, the .INF and .ICM files can  
be downloaded from the HP monitors support Web site. See  
“Downloading from the Worldwide Web” in this chapter.  
The Information File  
The .INF file enables the computer to communicate with the  
monitor and use all the monitor features. The INF file defines  
monitor resources used by Microsoft Windows operating systems  
to ensure monitor compatibility with the computer’s graphics  
adapter.  
This monitor is Windows Plug and Play compatible and the  
monitor will work correctly without installing the .INF file.  
Monitor Plug and Play compatibility requires that the computer’s  
graphic card is VESA DDC2 compliant and that the monitor  
connects directly to the graphics card. Plug and Play does not  
User Guide  
4–1  
       
Operating the Monitor  
work through separate BNC type connectors or through  
distribution buffers/boxes. You may need to install the .INF file if  
these conditions are not met.  
The Image Color Matching File  
The .ICM file provides accurate color representation. The .ICM  
files are data files that are used in conjunction with graphics  
programs to provide consistent color matching from monitor  
screen to printer, or from scanner to monitor screen. The .ICM  
file contains a monitor color system profile. This file is activated  
from within graphics programs that support this feature.  
The ICM color profile is written in accordance with the  
International Color Consortium (ICC) Profile Format  
specification.  
Installing the .INF and .ICM Files  
After you determine that you need to update, you can install the  
.INF and .ICM files from the CD or download them.  
Installing from the CD  
To install the .INF and .ICM files on the computer from the CD:  
1. Insert the CD in the computer CD-ROM drive. The CD menu  
displays.  
2. View the “INF and ICM Readme” file.  
3. Select “Install INF and ICM Files.”  
4. Follow the on-screen instructions.  
5. After the INF software has been installed, restart Windows.  
4–2  
User Guide  
     
Operating the Monitor  
6. Ensure that the proper resolution and refresh rates appear in  
the Windows Display control panel.  
You may need to install the digitally signed monitor .INF and  
.ICM files manually from the CD in the event of an installation  
error. Refer to the INF and ICM Readme file on the CD.  
Downloading from the Worldwide Web  
To download the latest version of .INF and .ICM files from the  
HP monitors support Web site:  
region.  
2. Follow the links for your monitor to the support page and  
download page.  
3. Ensure your system meets the requirements.  
4. Download the software by following the instructions.  
User Guide  
4–3  
 
Operating the Monitor  
Front Panel Controls  
Item  
Icon  
Name  
menu  
Function  
menu  
Launches on-screen displays  
and exits the menus and  
On-Screen Display.  
1
Left Adjustment  
Moves backward through menu  
options or decreases adjustment  
levels.  
2
Right Adjustment  
Moves forward through menu  
options or increases adjustment  
levels.  
3
4
select  
select  
Selects function and adjustment  
levels in the OSD menu  
Power/LED  
Controls power to the monitor.  
The LED on the power button  
indicates the state of the  
monitor.  
5
The icon for the  
power/LED varies on  
select models.  
4–4  
User Guide  
 
Operating the Monitor  
On-Screen Display  
The On-Screen Display (OSD) adjusts the screen image based on  
your viewing preferences. To access the OSD, do the following:  
1. If the monitor is not already on, press the power button to  
turn on the monitor.  
2. Press the menu button to display the On-Screen Display  
menu. A screen similar to this one appears. For a description  
of the icons that appear on the screen, see “On-Screen  
Display Functions” later in this chapter.  
3. To move to a function, press the Right-Adjustment or  
Left-Adjustment button on the front panel of your monitor  
until the function is highlighted.  
4. Press the select button on the monitor to choose the function.  
User Guide  
4–5  
 
Operating the Monitor  
5. The adjustment window displays. Press the Right-Adjustment  
or Left-Adjustment buttons to increase (Right) or decrease  
(Left) the level of adjustment.  
6. Press select to save the new adjustment.  
7. To exit the On-Screen Display, press the menu button once.  
On-Screen Display Functions  
Use the Right-Adjustment and Left-Adjustment buttons found on  
the front control panel of the monitor to adjust the on-screen  
display functions in the following table.  
On-Screen Display Icons and Functions  
Icon  
Function  
Description  
Contrast  
Right-Adjustment increases the contrast  
and Left-Adjustment decreases the  
contrast.  
Brightness  
Right-Adjustment increases the  
brightness and Left-Adjustment  
decreases the brightness.  
Horizontal  
Position  
Right-Adjustment moves the image to  
the right and Left-Adjustment moves the  
image to the left.  
Horizontal  
Size  
Right-Adjustment increases the  
horizontal size and Left-Adjustment  
decreases the horizontal size.  
Vertical  
Position  
Right-Adjustment moves the image up  
and Left-Adjustment moves the image  
down.  
Vertical  
Size  
Right-Adjustment increases the vertical  
size and Left-Adjustment decreases the  
vertical size.  
4–6  
User Guide  
 
Operating the Monitor  
On-Screen Display Icons and Functions (Continued)  
Icon  
Function  
Description  
Pincushion  
Right-Adjustment makes the image  
sides convex and Left-Adjustment  
makes the image concave.  
Trapezoid  
Right-Adjustment adjusts the image so  
the top is larger and Left-Adjustment  
adjusts the image so that the bottom is  
larger.  
Pin Balance Right-Adjustment moves the top and  
bottom of the image to the right and  
Left-Adjustment moves the top and  
bottom of the image to the left.  
Parallelo-  
gram  
This control corrects the tilted vertical  
edges of the image on both sides of the  
screen that are in the same direction.  
Tilt  
(Rotation)  
Right-Adjustment tilts the sides of the  
image to the right and Left-Adjustment  
tilts the sides of the image to the left.  
Moire  
Right-Adjustment increases the Moire  
correction and Left-Adjustment  
decreases the Moire correction.  
Degauss  
This control demagnetizes the screen to  
reduce color impurities.  
It is recommended that you  
not degauss more than once  
within a 30-minute period of  
time.  
Color Temp Right-Adjustment selects the color  
temperature to the right and  
Left-Adjustment selects the color  
temperature to the left.  
Reset  
This control resets the monitor to factory  
default values.  
User Guide  
4–7  
Operating the Monitor  
Monitor Messages  
No Signal Message  
If a No Signal message displays on the monitor screen, check to  
be sure the video cable is properly connected and ensure that the  
computer is powered on.  
4–8  
User Guide  
   
Operating the Monitor  
Out of Frequency Range Message  
If an Out of Frequency Range message displays on the monitor  
screen, the video resolution and/or refresh rate are set higher than  
the levels the monitor supports.  
To change the video resolution or refresh rate on the monitor:  
1. Restart the computer.  
2. Enter Safe Mode on the computer. Refer to the computer’s  
operating system Help for instructions on entering Safe  
Mode.  
3. Change the display settings to a supported setting (see  
“Technical Specifications”).  
4. Restart the computer so that the new settings take effect.  
User Guide  
4–9  
 
Operating the Monitor  
Using the Energy Saver Mode  
The monitor is designed to meet requirements for reduced power  
consumption. Using a combination of hardware and software  
functions, this energy-saving feature allows the computer to  
control the monitor’s power consumption and reduce the  
monitor’s power state when not in use.  
Power Management Status  
Power  
State  
On  
LED Color  
Green  
Consumption  
Description  
< 75 watts  
Normal Operation  
Sleep  
Amber  
< 4 watts  
Monitor screen is blank. High  
voltage is off. Heater voltage is  
off. There is a brief warm-up  
period before returning to full  
power mode.  
The monitor’s energy saver feature works only when the monitor  
is connected to a computer that also has energy saver features.  
The Energy Saver utility, with its energy saving features, is  
available with all Microsoft Windows operating systems. Some  
features are also available in DOS. Refer to the computer’s user  
guide for instructions on setting energy saver features (also  
referred to as power management features).  
4–10  
User Guide  
 
A
Troubleshooting  
Solving Common Problems  
The following table lists possible problems, the possible cause of  
each problem, and the recommended solutions.  
Problem  
Possible Cause  
Solution  
Screen is blank.  
Power cord is disconnected.  
Connect the power  
cord.  
Power switch is off.  
Turn on power.  
Video cable is improperly  
connected.  
Connect video cable  
properly.  
Screen blanking utility is  
active.  
Depress any key on  
the keyboard or move  
the mouse.  
Image appears  
blurred, indistinct, or  
too dark.  
Brightness and contrast are too  
low.  
Press the menu  
button to access the  
On-Screen Display.  
Select the Brightness  
and/or Contrast  
icons to adjust as  
needed.  
Color is abnormal.  
A magnetic object may be  
nearby.  
Move the object  
farther away.  
User Guide  
A–1  
     
Troubleshooting  
Problem  
Possible Cause  
Solution  
Monitor may have been  
moved or inadvertently  
bumped.  
Press the menu  
button to access the  
On-Screen Display.  
Select Degauss to  
activate.  
Hewlett-Packard  
suggests you not  
degauss more than  
once within a  
30-minute period of  
time.  
Image is too large or  
too small.  
Horizontal width may need  
adjustment.  
Press the menu  
button to access the  
On-Screen Display.  
Select Horizontal Size  
to adjust as needed.  
Vertical height may need  
adjustment.  
Press the menu  
button to access the  
On-Screen Display.  
Select Vertical Size to  
adjust as needed.  
Image is not centered. Horizontal position may need  
adjustment.  
Press the menu  
button to access the  
On-Screen Display.  
Select Horizontal  
Position to adjust as  
needed.  
Vertical position may need  
adjustment.  
Press the menu  
button to access the  
On-Screen Display.  
Select Vertical  
Position to adjust as  
needed.  
A–2  
User Guide  
Troubleshooting  
Problem  
Possible Cause  
Solution  
“No Signal” is  
displayed on screen.  
Monitor video cable is  
disconnected.  
Connect the 15-pin  
monitor video cable  
to the computer. Be  
sure that the  
computer power is  
on.  
“Out of Frequency” is  
displayed on screen.  
Video resolution and/or  
refresh rate are set higher than  
what your monitor supports.  
Restart your computer  
and enter Safe  
Mode. Change your  
settings to a  
supported setting (see  
“Technical  
Specifications”).  
Restart your computer  
so that the new  
settings take effect.  
Monitor is  
overheating.  
There is not enough air space  
to allow proper ventilation.  
Leave at least 3  
inches (76 mm) of  
ventilation space  
around the monitor,  
and do not place  
objects on top of the  
monitor.  
User Guide  
A–3  
Using the Worldwide Web  
Before contacting customer services, refer to the support Web site  
Preparing to Call Technical Support  
If you cannot solve a problem using the troubleshooting tips in  
this section, you may need to call technical support. Have the  
following information available when you call:  
The monitor  
Monitor model number  
Serial number for the monitor  
Purchase date on invoice  
Conditions under which the problem occurred  
Error messages received  
Hardware configuration  
Hardware and software you are using  
A–4  
User Guide  
     
B
Technical Specifications  
All performance specifications are provided by the component  
manufacturers. Performance specifications represent the highest  
specification of all HP’s component manufacturers’ typical level  
specifications for performance and actual performance may vary  
either higher or lower.  
75 and 7540 Series 17”  
Curved CRT Monitors  
Screen Size  
17” (43 cm) visual diagonal  
Viewable screen size 16” (41 cm)  
Anti-Glare Coating  
Dot Pitch  
0.28 mm (diagonal)  
234 x 312 (mm) typical  
Infinite  
Display Area Default  
Display Colors  
Display Resolutions  
640 x 480  
Refresh Rates  
60 Hz  
640 x 480  
75 Hz  
640 x 480  
85 Hz  
720 x 400  
70 Hz  
800 x 600  
75 Hz  
800 x 600  
85 Hz  
1024 x 768  
1024 x 768  
1280 x 1024  
75 Hz  
85 Hz (preferred user resolution)  
60 Hz (maximum resolution)  
User Guide  
B–1  
     
Technical Specifications  
Synchronization  
(Horizontal)  
30 to 70 KHz  
Synchronization (Vertical)  
Max Pixel Clock  
Input Signal  
50 to 160 Hz  
110 MHz Max.  
Video RGB Analog Sync. TTL Separate  
15-pin D-sub connector  
Video Cable  
Power Input Voltage  
Frequency  
100 to 240V AC  
50 +3 to 60 +3 Hz  
Inrush Current  
30 amps @ 120V AC  
60 amps @ 220V AC  
Power Consumption  
75 W (Max.)  
Dimension (W x H x D)  
Unpacked w/attached  
base  
16.2 x 16.2 x 17 inches (maximum)  
410 x 410 x 430 mm (maximum)  
Weight  
38 lb Max.  
17 kg Max.  
o
o
Operating Temperature  
Storage Temperature  
50 F to 95 F  
o
o
10 C to 35 C  
o
o
-22 F to 140 F  
o
o
-30 C to 60 C  
Humidity  
20% to 80% (non-condensing)  
Up to 10,000 ft./3048 meters  
Select models meet TCO’03  
Select models meet MPRII  
Yes  
Altitude  
TCO Requirements  
MPRII  
Plug and Play  
B–2  
User Guide  
Technical Specifications  
705 and 7600 Series 17”  
Flat CRT Monitors  
Screen Size  
17” (43 cm) visual diagonal  
Viewable screen size 16” (41 cm)  
0.25 to 0.28 mm (variable)  
234 x 312 (mm) typical  
Infinite  
Dot Pitch  
Display Area Default  
Display Colors  
Display Resolutions  
640 x 480  
Refresh Rates  
60 Hz  
640 x 480  
75 Hz  
640 x 480  
85 Hz  
720 x 400  
70 Hz  
800 x 600  
75 Hz  
800 x 600  
85 Hz  
1024 x 768  
1024 x 768  
1280 x 1024  
75 Hz  
85 Hz (preferred user resolution)  
60 Hz (maximum resolution)  
Synchronization  
(Horizontal)  
30 to 70 KHz  
Synchronization (Vertical)  
Max Pixel Clock  
Input Signal  
50 to 160 Hz  
110 MHz Max.  
Video RGB Analog Sync. TTL Separate  
15-pin D-sub connector  
Video Cable  
Power Input Voltage  
Frequency  
100 to 240V AC  
50 +3 to 60 +3 Hz  
Inrush Current  
30 amps @ 120V AC  
60 amps @ 220V AC  
Power Consumption  
75 W (Max.)  
User Guide  
B–3  
 
Technical Specifications  
Dimension (W x H x D)  
Unpacked w/attached  
base  
16.2 x 16.2 x 17 inches (maximum)  
410 x 410 x 430 mm (maximum)  
Weight  
38 lb Max.  
17 kg Max.  
o
o
Operating Temperature  
Storage Temperature  
50 F to 95 F  
o
o
10 C to 35 C  
o
o
-22 F to 140 F  
o
o
-30 C to 60 C  
Humidity  
20% to 80% (non-condensing)  
Up to 10,000 ft./3048 meters  
Select models meet TCO’03  
Select models meet MPRII  
Yes  
Altitude  
TCO Requirements  
MPRII  
Plug and Play  
B–4  
User Guide  
Technical Specifications  
7650 Series 17” Flat CRT Monitors  
Screen Size  
17”(43 cm) visual diagonal  
Viewable screen size 16” (40.6 cm)  
Anti-Glare Coating  
Dot Pitch  
0.25 to 0.28 mm (variable)  
234 x 312 (mm) typical  
Infinite  
Display Area Default  
Display Colors  
Display Resolutions  
640 x 480  
Refresh Rates  
60 Hz  
640 x 480  
75 Hz  
640 x 480  
85 Hz  
720 x 400  
70 Hz  
800 x 600  
75 Hz  
800 x 600  
85 Hz  
1024 x 768  
1024 x 768  
1280 x 1024  
1600 x 1200  
75 Hz  
85 Hz (preferred user resolution)  
75 Hz  
65 Hz (maximum resolution)  
Synchronization (Horizontal)  
Synchronization (Vertical)  
Max Pixel Clock  
30 to 86 KHz  
50 to 160 Hz  
180 MHz Max.  
Input Signal  
Video RGB Analog Sync. TTL Separate  
15-pin D-sub connector  
Video Cable  
Power Input Voltage  
Frequency  
100 to 240V AC  
50 +3 to 60 +3 Hz  
Inrush Current  
30 amps @ 120V AC  
60 amps @ 220V AC  
Power Consumption  
75 W (Max.)  
Dimension (W x H x D)  
Unpacked w/attached base  
16.2 x 16.2 x 17 inches (maximum)  
410 x 410 x 430 mm (maximum)  
User Guide  
B–5  
 
Technical Specifications  
Weight  
38 lb Max.  
17 kg Max.  
o
o
Operating Temperature  
Storage Temperature  
50 F to 95 F  
o
o
10 C to 35 C  
o
o
-22 F to 140 F  
o
o
-30 C to 60 C  
Humidity  
20% to 80% (non-condensing)  
Up to 10,000 ft./3048 meters  
Select models meet TCO’03  
Select models meet MPRII  
Yes  
Altitude  
TCO Requirements  
MPRII  
Plug and Play  
B–6  
User Guide  
C
Agency Regulatory Notices  
Federal Communications  
Commission Notice  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio or television  
technician for help.  
User Guide  
C–1  
     
Agency Regulatory Notices  
Modifications  
The FCC requires the user to be notified that any changes or  
modifications made to this device that are not expressly approved  
by Hewlett Packard Company may void the user's authority to  
operate the equipment.  
Cables  
Connections to this device must be made with shielded cables  
with metallic RFI/EMI connector hoods to maintain compliance  
with FCC Rules and Regulations.  
Declaration of Conformity for  
Products Marked with FCC Logo,  
United States Only  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not  
cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
For questions regarding your product, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call 1-800-HP-INVENT (1-800 474-6836)  
For questions regarding this FCC declaration, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call (281) 514-3333  
C–2  
User Guide  
     
Agency Regulatory Notices  
To identify this product, refer to the Part, Series, or Model  
number found on the product.  
Canadian Notice  
This Class B digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les  
exigences du Règlement sur le matériel brouilleur du Canada.  
European Union Regulatory Notice  
This product complies with the following EU Directives:  
Low Voltage Directive 73/23/EEC  
EMC Directive 89/336/EEC  
Compliance with these directives implies conformity to  
applicable harmonized European standards (European Norms)  
which are listed on the EU Declaration of Conformity issued by  
Hewlett-Packard for this product or product family.  
This compliance is indicated by the following conformity  
marking placed on the product:  
XXXX*  
This marking is valid for  
non-Telecom products and EU  
harmonized Telecom products  
(e.g. Bluetooth)  
This marking is valid for EU non-harmonized  
Telecom products.  
*Notified body number (used only if applicable -  
refer to the product label)  
User Guide  
C–3  
     
Agency Regulatory Notices  
Disposal of Waste Equipment by Users  
in Private Household in the European  
Union  
This symbol on the product or on its  
packaging indicates that this product must not  
be disposed of with your other household  
waste. Instead, it is your responsibility to  
dispose of your waste equipment by handing it  
over to a designated collection point for the  
recycling of waste electrical and electronic  
equipment. The separate collection and  
recycling of your waste equipment at the time  
of disposal will help to conserve natural resources and ensure that  
it is recycled in a manner that protects human health and the  
environment. For more information about where you can drop off  
your waste equipment for recycling, please contact your local city  
office, your household waste disposal service or the shop where  
you purchased the product.  
Japanese Notice  
C–4  
User Guide  
   
Agency Regulatory Notices  
Korean Notice  
Power Cord Set Requirements  
The monitor power supply is provided with Automatic Line  
Switching (ALS). This feature allows the monitor to operate on  
input voltages between 100-120V or 200-240V.  
The power cord set (flexible cord or wall plug) received with the  
monitor meets the requirements for use in the country where you  
purchased the equipment.  
If you need to obtain a power cord for a different country, you  
should purchase a power cord that is approved for use in that  
country.  
The power cord must be rated for the product and for the voltage  
and current marked on the product's electrical ratings label. The  
voltage and current rating of the cord should be greater than the  
voltage and current rating marked on the product. In addition, the  
cross-sectional area of the wire must be a minimum of 0.75 mm²  
or 18AWG, and the length of the cord must be between 6 feet  
(1.8 m) and 12 feet (3.6 m). If you have questions about the type  
of power cord to use, contact your HP authorized service  
provider.  
A power cord should be routed so that it is not likely to be walked  
on or pinched by items placed upon it or against it. Particular  
attention should be paid to the plug, electrical outlet, and the  
point where the cord exits from the product.  
User Guide  
C–5  
   
Agency Regulatory Notices  
Japanese Power Cord Requirements  
For use in Japan, use only the power cord received with this  
product.  
CAUTION: Do not use the power cord received with this product on  
any other products.  
Ä
C–6  
User Guide  
 

GE PHP900SM User Manual
GE DECT 28214xx1 User Manual
Frigidaire FGEC3665K User Manual
Electrolux FEC30C4ABE User Manual
Eizo L351 User Manual
Eizo EIZO FlexScan L352T C User Manual
Cypress CY14B101Q3 User Manual
ClearOne comm MAXAttach IP 2 User Manual
Campbell Hausfeld HL4421 User Manual
Asus Computer Monitor PG221 User Manual