Farenheit Technologies HRD 9BK User Manual

HRD-9BK  
HRD-9BG  
HRD-9GR  
HRD-9GRDK  
Two Preloaded 8.8" Wide Touch Screen Universal  
Replacement Headrest Monitors Package  
AV2  
USB  
SD  
OWNER S MANUAL  
Specifications  
Contents  
Power Requirements  
Power Consumption  
Screen Size  
DC 12V  
Mute  
25  
25  
25  
Caution  
4
Play or Pause  
Audio  
9W  
How To Control The Monitor  
Remote Control  
6
9
8. 8 TFT-LCD  
16:9 Wide  
1440x234  
DVD-AV1-AV2  
Stop  
26  
26  
26  
Power and Mode Selection  
How to Swivel The Monitor  
How to Watch The Monitor  
11  
11  
11  
Arrows  
Setup  
Menu  
Screen Format  
Resolution Pixel  
A/V Input  
26  
Selecting an AV mode  
Picture Control  
Contrast/Brightness/Color/FM  
12  
13  
13  
Display  
Number Buttons  
Subtitle  
Title  
27  
27  
28  
28  
A/V Output  
1 EA  
Dimensions(With shroud)  
11. 6(L)X8. 7(W)X4. 7(H)inches  
Active Matrix TFT  
DVD Setup  
Setup Menu  
14  
14  
Slow  
Fast Reverse Searching  
28  
29  
LCD Panel Type  
General Setup  
TV Aspect Ratio  
Angle Viewing  
15  
15  
15  
NTSC/PAL auto select  
Compatible video standard  
Fast Forward Searching  
Previous  
29  
30  
30  
OSD Language  
15  
16  
Next  
Note : This equipment has been tested and found to comply with the limits for  
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
when the equipment is operated in a commercial environment.  
Screen Saver  
Audio Setup  
Repeat A-B  
30  
16  
Repeat  
NTSC/PAL  
Angle  
31  
31  
31  
Dolby Digital Setup  
Equalizer Settings  
Video Setup  
17  
17  
19  
This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instruction manual, may cause  
harmful interference to radio communications. Operation of this equipment in  
a residential area is likely to cause harmful interference in which case the user  
will be required to correct the interference at his own expense.  
32  
PBC  
Zoom  
Quality  
19  
22  
32  
32  
Preferences Setup  
GO TO  
TV Type  
PBC  
Audio  
22  
22  
22  
22  
23  
23  
SD/USB Functions  
33  
Connection Diagram  
Installation  
34  
35  
Subtitle  
Disc Menu  
Parental  
Default  
36  
23  
24  
Disc Information  
Troubleshooting  
Specifications  
Password Setup  
37  
38  
Password Mode  
Password Change  
DVD Functions  
24  
24  
25  
Eject  
Vol+/Vol-  
25  
25  
3
38  
Caution  
Troubleshooting  
Please read and observe all warnings and instructions in this manual  
and those marked on the unit. Retain this booklet for future reference.  
There are two kinds of alarm symbols as follows:  
Symptom  
Items to Check  
Actions to be Taken  
The lightning bolt with arrowhead inside in an equilateral  
triangle is intended to alert the user to the presence of  
dangerous voltage within the product s enclosure that may be  
of sufficient magnitude to constitute a risk of electric shock to  
people.  
Buttons do not work.  
No sound  
Is the power turned on?  
Check the car battery capacity.  
,
Is the audio which is connected with  
the audio cable set to receive  
the DVD signal output?  
Select the correct input mode for the audio receiver.  
Connect the audio cable into the jacks securely.  
Turn on the monitor connected with the audio cable.  
WARNING  
Is audio cable connected securely?  
Set the Audio Output to the correct position,  
and then turn on the DVD player again by pressing  
the POWER button.  
Is the monitor which is connected  
with the audio cable turned on?  
The exclamation point inside an equilateral triangle is intended  
to alert the user to the presence of important operating and  
maintenance (servicing) instructions in the literature accompanying  
Is the audio output set  
in the correct position?  
the product.  
CAUTION  
Remote control does  
not work properly.  
Is the remote control facing  
the remote sensor?  
Point the remote control toward the remote sensor of  
the product.  
Is the distance too far?  
Use the remote control within 15 feet.  
Remove the obstacle.  
Is there any obstacle in the middle?  
Is the battery weak?  
Replace with new battery.  
WARNING  
Do not mount the product where  
it will obstruct the deployment of  
Installation of all TV monitors  
the airbag or in an area where it  
,
M
E
N
U
must be out of the driver s  
field of vision.  
would affect the driver s ability  
to control the vehicle. Also be  
careful to avoid mounting the  
product where it can become  
hazardous during sudden stops  
or in the event of an accident.  
Moisture or condensation on lens  
When a disc is brought from a cold environment to a warm one, there may be moisture  
on the the disc, or condensation on the pickup lens. It will affect disc playback.  
Do not try and service these  
products yourself, locale a  
qualified service center or  
factory service center for all  
repairs.  
1. Remove the disc from the DVD player.  
2. Turn on the power and leave it on for an hour to vaporize the condensation.  
Use extra caution with any liquids  
in your car. If you or your child  
spills any liquid on these products,  
pull your vehicle to the roadside  
and turn the key off to disconnect  
or wipe the products with a towel. Do not  
operate the equipment until all liquids have  
either evaporated or you have had the monitor  
inspected at a service center by a qualified  
technician. Severe harm or danger can result.  
Be careful not to drop or  
apply under pressure to the  
front panel of your video  
monitor. If the screen cracks  
due to misuse, your warranty  
will be void!  
Use only a damp cloth to clean  
the screen and use only purified  
water on the cloth. wring out all  
excess water prior to wiping the  
screen. Do not use any cleaners  
or chemicals to clean the screen.  
In most cases a dry cloth will do!  
4
37  
Caution  
Disc Information  
CAUTION  
DVD features  
DVD discs provide high-resolution images with high-quality sound. This DVD player  
can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and  
Mp3 discs.  
Watching the monitor for an  
extended period of time  
without the engine running  
may deplete the vehicle s  
battery charge.  
Quality installations are best  
performed by qualified and  
certified installers.  
Discs that cannot be played  
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In  
addition, a CD or a CD-RW which was recorded on special software cannot be played.  
This product is designed for  
operation with a 12 Volt DC,  
negative ground vehicle. It  
is not suitable for operation  
under other conditions or  
voltages.  
Region code  
Don t touch the unit if there is  
a flash of lightning. You may  
receive an electric shock.  
Your DVD player is designed and manufactured to region management information  
that is recorded on a DVD disc. Please check the region code.  
1: North America  
4: Australia, Mid & South America  
2: Japan  
3: Korea and Southeast Asia  
5: Russia 6: China  
How to handle the disc  
Don t touch the shiny side of the disc (the side with the embedded information).  
Don t stick a label or a glue-based note on either side of the disc.  
Don t use discs that have glue or a damaged label with exposed adhesive residue.  
It might result in damage to your DVD player.  
Do not cover or stop up heater  
ducts or vents. It may cause a  
fire or receive an electric shock.  
Do not bring magnetic devices  
such as credit card or magnetic  
card near the magnets.  
Don t put discs in the sunshine.  
Park your car in the shade.  
Operating Notes  
1. The operating temperature of this product is limited to 14 ~+140 F.  
2. If your vehicle is extremely hot or cold you must allow time for your air  
conditioner or heater to cool or heat the vehicle until operating temperatures  
have returned to normal operating ranges.  
How to handle the discs  
Only use round discs. Discs with other shapes like a star, a heart, etc. may cause  
damage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dry  
one. Before playback, wipe the disc outward from the center with a clean cloth. Do not  
use any type of solvent such as thinner, benzene, commercially available cleaners or  
antistatic spray. To avoid damaging your DVD player, don t use a scratched disc.  
3. Optimal picture quality is achieved when viewed from directly front of the  
monitor (+/-30degrees).  
4. Do not open the housing and attempt to make any repairs yourself. Refer  
servicing to qualified personnel.  
5. DVD Players use an invisible laser beam which can cause hazardous radiation  
exposure. Be sure to operate the unit correctly as instructed.  
6. Do not cut the car power supply off while a disc is playing. It can cause  
damage to the DVD Player.  
7. If the buttons get stuck, please try to press the up of buttons, it will get back.  
It won't impact using normal.  
8. If you cann't find the files name in list when playing, please reset units or  
turn off/on over again.  
9. If the unit cann't be change mode when playing some special files which the unit  
didn't support, please reset units or turn off/on over again.  
5
36  
Installation  
How To Control The Monitor  
1. Power On/Off  
SD  
USB  
AV  
2
MENU  
MODE  
MPWR  
AV2  
AV2  
USB  
USB  
SD  
SD  
<Unit>  
To power on the unit, press POWER button on the monitor;  
or press POWER button on the remote control.  
Product installed  
1. Remove the existing headrest from the seat.  
2. Adjust the posts of the new headrest to fit the holes in the seat where the  
headrest will be installed. The post can be moved together or apart  
grasp one post in each hand, move the posts in opposing directions  
(like they were walking) while pushing them toward each other or away  
from each other.  
MENU  
MODE  
MPWR  
AV2  
USB  
SD  
To power the off unit, press MPWR or PWR on the monitor;  
or press POWER button on the remote control.  
2. Mode Change  
3. Insert the cable in the proper hole. Insert the posts into the holes in the  
seat and carefully work the headrest into position. Make sure the cable  
is not pinched.  
(1) Press any place on the monitor screen with your finger softly ,and you will see the MODE button on the monitor  
.
2
4. Run the cable down the seat and out to the location of the video source  
unit (such as a DVD player).  
+
PLAY  
VOL  
VOL  
1
-
STOP  
PREV  
MODE  
PWR  
5. See the picture on the right and you can adjust  
the distance between the tubes to required  
space(pole width adjustments 4 ~ 8.2 ) .  
MENU  
NEXT  
AV2  
AV2  
USB  
USB  
SD  
SD  
How to use the Adapter tubes  
AV2  
USB  
SD  
(2) Press the MODE button to change an Input Mode.(AV1-AV2-DVD)  
Since the spacing of the mounting holes  
can vary on different veicles we supply  
two adapter tubes. Use these tubes when  
the headrest mounting holes in your seat  
are too large for the posts of the headrest  
monitor.  
+
PLAY  
STOP  
PREV  
NEXT  
VOL  
VOL  
-
MODE  
PWR  
MENU  
MDE  
MPWR  
MENU  
AV2  
AV2  
USB  
USB  
SD  
SD  
35  
6
How To Control The Monitor  
Connection Diagram  
3. Picture Control Menu  
Connect the wires as indicated:  
(1) When the MENU button on the monitor screen is  
pressed, the picture setting menu will be shown.  
a. Red: Connect to a switched(+) 12 volt source (ACC). Use a lead that has(+) 12V  
when the ignition on or in the ACC position so the monitors turns off when the key is  
in the off position. Wiring the monitors hot could cause your battery to run down  
when the engine is not running.  
(2) Use to achieve the desired settings for  
MENU  
CONTRAST  
BRIGHTNESS  
COLOR  
FM  
RESET  
CONTRAST,BRIGHTNESS, COLOR,  
FM and RESET.  
CONTRAST : Contrast between light and shade  
BRIGHTNESS : Dim  
COLOR : Control of color  
SHARPNESS : Sharpness of view  
Bright  
b. Black: Connect to a good chassis ground.  
50  
c. Reversing the polarity of the red and black leads will damage the monitor.  
d. Connect the video input connector to the video output from the source unit  
(i.e. DVD player)  
FM  
: 87.7 89.1MHz  
MODE  
MENU  
RESET  
: Brings its factory defaults  
(3) Press the MENU button continuously to highlight  
the desired picture setting menu to control, and  
adjust the values with the left /right arrow buttons  
while menu OSD is still displayed on the screen for  
changing the values.  
AV2  
USB  
SD  
e. Test the syetem.  
Note  
(4) When using a Remote Controller, press MENU button  
on the Remote Controller to bring out the menu, and  
adjust the values.  
If there is no more touch control for 5 seconds  
while any buttons or the Picture Control Menu  
are being shown on the monitor, all buttons &  
menu will be disappeared automatically.  
3. Description of Remoto Control Menu for DVD Player  
PLAY  
Play DVD  
VOL+  
Volume Up  
+
PLAY  
VOL  
VOL  
STOP  
Stop DVD play  
VOL-  
Volume Down  
-
STOP  
PREV  
NEXT  
AV2  
USB  
SD  
PREV  
Move to the previous  
chapter or track  
MODE  
AV1 AV2 DVD  
MODE  
PWR  
NEXT  
Move to the next  
chapter or track  
MENU  
PWR  
DVD Player  
Power On/Off  
AV2  
USB  
VIDEO INPUT  
AUDIO INPUT  
AUDIO INPUT  
VIDEO OUTPUT  
AUDIO OUTPUT  
SD  
Use these buttons to select either fast  
forward or fast reverse playback.  
AUDIO OUTPUT  
MENU  
Brightness  
Contrast  
Tint  
Color  
Sharpnss  
Reset  
RF Wireless Stereo Headphone  
(A CH:914MHz B CH:915MHz)  
7
34  
SD/USB Functions  
How To Control The Monitor  
1. When USB or SD is inputed, the monitor will be displayed as shown below. But when  
you input USB that the function can not change into SD S state (only the SD is  
moving). And you can select the desired menu by pressing the MODE button on the  
remote control of monitor.  
2. Use the (arrow and ENTER) buttons to select and set desired settings.  
00:00 00:00  
000/003  
kbps  
\
11  
AV2  
USB  
SD  
..  
..  
9
10  
8
1
2
3
4
5
6 7  
8
HEADPHONE JACK  
Headphone output  
AV2 Inputs  
STOP  
PIPE  
When this button is pressed,  
playback is stopped.  
Adjustable steel Pipe  
9
SD Inputs  
10  
11  
USB Inputs  
REMOTE IR SENSOR  
8
33  
Remote Contro  
DVD Functions  
PBC  
Remote Control  
[DVD]/[AUDIO]/[MP3]  
This button does not function in PBC mode.  
[VCD]  
1
POWER  
Turns the DVD Player/Monitor on or off.  
2
MUTE  
Press this button to switch off the  
audio during playback. Press again  
to restore the audio.  
You can turn the PBC (Play Back Control) function on or off by pressing this button.  
When PBC is loaded, the PBC function is enabled automatically. This function is  
similar to selection of DVD title. Please note that this function does not work with  
MP3 dics.  
iPOD  
Vol+  
MONITOR  
(IPOD) (not function in this unit)  
3
To start playback of iPOD, press  
this button. Press again to pause  
the playback. If playback is paused,  
press this button to resume  
playback.  
Zoom  
Vol-  
CONDITION  
ZOOM X 2  
ZOOM X 3  
ZOOM X 4  
ZOOM X 1 / 2  
ZOOM X 1 / 3  
ZOOM X 1 / 4  
Off  
OSD  
2 X  
[DVD]  
VOL-/VOL+ (not function in this unit)  
Some DVDs are programmed to allow you to zoom into  
the image, magnifying it. Pressing the ZOOM button  
does this in steps, according to the chart to the right.  
3 X  
Use to incease or decrease  
volume level.  
4 X  
1 / 2  
1 / 3  
1 / 4  
RIGHT( )/LEFT( ) ARROWS  
(not function in this unit)  
[VCD]/[AUDIO]/[MP3]  
This button does not function in this mode.  
Use these buttons(press once)  
to skip to the next or last track,  
chapter or file on the iPOD in  
the player. But if you use these  
buttons (press continuous) to  
select either fast forward or fast  
reverse playback.  
GO TO  
The GO TO function allows you to begin playback at a specific location on the disc. To  
do this, press GO TO and navigate the screen which follows to select this playback  
location.  
AV SELECT  
Title  
Move to the desired title.  
DVD AV1 AV2  
MENU (OSD on monitor)  
Chapter  
Press this button to open the on-  
screen menu system to setup and  
control various parameters of the  
monitor and DVD player.  
Move to the desired chapter.  
Audio  
Selects the desired audio output.  
UP/DOWN  
Subtitle  
Select the desired subtitle.  
Menu  
Use to move to the desired menu.  
TITLE (Title menu)  
When a DVD is playing, press this  
button to view the Title Menu.  
Title  
01 / 02  
P/N  
Chapter  
Audio  
06 / 61  
Angle  
5.1CH Chinese  
OFF  
This button permits you to choose  
among Multi, PAL and NTSC.  
Subtitle  
Watch the different view angle.  
DISPLAY  
Press to show elapsed or remaining  
time of a chapter or a title.  
Title Elaapsed 0:20:02  
MODE  
TT Time  
Total time.  
Bitrate 31  
Use this button to switch between  
three modes  
DVD SD USB  
PBC (Video CD only)  
CH Time  
Chapter time.  
Press this button to access the special  
Playback Control functions for VCD  
2.0 format Video CD S.  
MENU (DVD menu)  
Repeat  
This button permits you to view the  
menu on the DVD.  
Sets the repeat play.  
Time Display  
Watch play time.  
NUMERIC button  
SUBTITLE  
Use this button to select the menu  
for choosing a subtitle language.  
Use when making a selection on the  
menu screen.  
9
32  
Remote Control  
DVD Functions  
Repeat  
GO TO  
RETURN  
Use to search for a title or a chapter on  
your DVD disc.  
Press this button to return to the root menu.  
[AUDIO]  
[DVD]  
SETUP  
Pressing REPEAT button changes  
the play mode as follows:  
Pressing REPEAT button changes  
the play mode as follows:  
Press this button to display the Setup  
menu. The Setup menu enables you  
to enter the settings required for the  
unit to work properly.  
STOP  
Press this button to stop the playback  
of the current disc.  
OSD  
Chapter  
CONDITION  
OSD  
CONDITION  
Repeat single  
SKIP FORWARD/BACK  
REPEAT  
Repeat chapter  
Repeat title  
Track  
Use these buttons to skip to the next  
or last track, chapter or file on the  
disc in the player.  
Press this button to change the playback  
mode to repeat.  
All  
All  
Title  
All  
A-B (repeat from A to B)  
All  
Repeat off  
FAST FORWARD/REVERSE PLAY  
Use this button to select the beginning  
and end of a track which you wish to have  
repeat in playback.  
Repeat off  
Use these buttons to select either fast  
forward or fast reverse playback.  
[VCD]  
[MP3]  
VOL-/+ button  
The REPEAT button does not function  
when a VCD disc is being played.  
Pressing REPEAT button changes  
the play mode as follows:  
Use to incease or decrease volume level.  
AUDIO  
Use this button to select one of the  
audio soundtracks programmed on a  
DVD disc. It is alse used to select the  
audio output mode for the DVD  
playback.  
OSD  
CONDITION  
Single  
Repeat One  
Repeat Folder  
Repeat folder  
Folder  
Repeat folder one time  
ENTER  
Press this button to confirm the item  
you have found and highlighted using  
the arrow buttons. Usually this is done  
to confirm a selection or item to be  
played on the DVD.  
Shuffle  
Random  
Single  
All  
Random play  
Single play  
ZOOM  
If your DVD disc supports zooming in  
to see the program differently, pressing  
this button will enable you to change  
the amount of zoom.  
NTSC/PAL  
This button is used to select the video standard for the DVD mode between NTSC  
and PAL formats.  
UP/DOWN/RIGHT/LEFT ARROWS  
Use thes buttons to navigate the  
various menus and screens for the  
monitor and DVD systems.  
PLAY/PAUSE  
Angle  
To start playback of a disc, press this  
button. Press again to pause the  
playback. If playback is paused, press  
this button to resume playback.  
Some DVD s are recorded with additional footage which allows you to view a scene  
from a different camera angle. If the ANGLE feature is enabled in the Setup Menu  
(see page 14) and the disc has this option,an angle mark will be displayed on  
the screen. When that occurs, press the ANGLE button to see these alternate viewing  
angles.  
10  
31  
DVD Functions  
Power And Mode Selection  
How to Swivel The Monitor  
Prev(  
)
You can adjust the swivel angle as shown below.  
[DVD]/[VCD]  
Press this button to advance the player from the current chapter to the previous  
chapter.  
[AUDIO]/[MP3]  
Press this button to move to the previous track.  
AV2  
USB  
SD  
Make this arrow to swivel the monitor  
Next(  
)
[DVD]/[VCD]  
Press this button to advance the player from the current chapter to the next chapter.  
[AUDIO]/[MP3]  
Press this button to move from the current track to the next track.  
How to Watch The Monitor  
1. Connect the monitor to the external devices.  
2. Press the POWER button on either the remote control or the unit once to turn  
the power on.  
Press the same POWER button to turn the power off.  
Repeat(A-B)  
[DVD]/[VCD]/[AUDIO]  
You can set the player to repeat a segment over and over until you cancel it. To do  
this, you mark the beginning of the desired segment (A) and the end of segment (B).  
The selected segment will be  
repeated automatically until canceled.  
OSD  
A
CONDITION  
Start point of repeat  
A
B
Ending point repeat function  
REMOTE CONTROLLER  
UNIT  
3. Turn on the external devices and view.  
11  
30  
Power and Mode Selection  
DVD Functions  
Fast Reverse Searching(  
[DVD]  
)
Selecting an AV mode  
[AUDIO]  
1. Turn the power ON on the unit and on the external devices.  
Pressing FR button repeatedly changes  
the play mode as follow:  
Pressing FR button repeatedly  
changes the play mode as follow:  
OSD  
FR 2X  
FR 4X  
FR 8X  
FR 16X  
FR 32X  
PLAY  
CONDITION  
2X rewind search  
4X rewind search  
8X rewind search  
16X rewind search  
32X rewind search  
Play  
2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button on  
the unit or on the remote control.  
OSD  
CONDITION  
2X rewind search  
4X rewind search  
8X rewind search  
16X rewind search  
32X rewind search  
Play  
FR 2X  
FR 4X  
3. Play the external device.  
FR 8X  
FR 16X  
[MP3]  
Pressing FR button repeatedly  
changes the play mode as follows:  
FR 32X  
PLAY  
OSD  
FR 2X  
FR 4X  
FR 8X  
FR 16X  
FR 32X  
PLAY  
CONDITION  
2X rewind search  
4X rewind search  
8X rewind search  
16X rewind search  
32X rewind search  
Play  
Fast Forward Searching(  
[DVD]  
Pressing FF button repeatedly changes  
)
[AUDIO]/[VCD]  
Pressing FF button repeatedly  
changes the play mode as follow:  
the play mode as follow:  
OSD  
FF 2X  
FF 4X  
FF 8X  
FF 16X  
FF 32X  
PLAY  
CONDITION  
2X forward search  
4X forward search  
8X forward search  
16X forward search  
32X forwardsearch  
Play  
OSD  
CONDITION  
2X forward search  
4X forward search  
8X forward search  
16X forward search  
32X forward search  
Play  
FF 2X  
FF 4X  
FF 8X  
FF 16X  
[MP3]  
Pressing FF button repeatedly  
changes the play mode as follows:  
FF 32X  
PLAY  
OSD  
FF 2X  
FF 4X  
FF 8X  
FF 16X  
FF 32X  
PLAY  
CONDITION  
2X forward search  
4X forward search  
8X forward search  
16X forward search  
32X forwardsearch  
Play  
12  
29  
Picture Control  
DVD Functions  
Subtitle(SUB-T)  
Contrast/Brightness/Color/FM  
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until  
you arrive at the screen for that item. Use the arrow buttons to adjust the value.  
Press the MENU button to make another adjustment or leave the MENU system.  
[DVD]  
This button is used to select the language for the on-screen display system.  
(This title menu may vary, depending on the particular DVD.)  
1. Bring up the on-screen function menu by pressing the MENU button on the unit  
or the remote control.  
2. Press the MENU button on the unit or the remote control of monitor until you see  
the item you wish to adjust.  
3. Use the arrow buttons to adjust the value.  
Title  
4. Press the MENU button to make another adjustment or leave the MENU system.  
[DVD]  
Used to display the title menu of the loaded DVD disc.  
This function is only present on discs which support it.  
CONTRAST  
50  
BRIGHTNESS  
50  
Slow(  
)
COLOR  
[DVD]/[VCD]  
OSD  
CONDITION  
50  
2X slow forward  
1 / 2  
Use this button to play a disc in slow-forward or  
slow-reverse. Slow playback can be done at five  
different speeds. Pressing this button repeatedly  
decreases the speed in steps. Pressing a sixth  
time returns playback to the normal speed.  
4X slow forward  
8X slow forward  
16X slow forward  
32X slow forward  
2X slow rewind  
4X slow rewind  
8X slow rewind  
16X slow rewind  
1 / 4  
FM  
1 / 8  
1 / 16  
1 / 32  
1 / 2  
87.7  
(FM function added 87.7 87.9 88.1 88.3 88.5  
88.7 88.9 89.1MHz)  
1 / 4  
1 / 8  
1 / 16  
32X slow rewind  
Play  
1 / 32  
Play  
13  
28  
DVD Setup  
DVD Functions  
Display  
Setup Menu-Main Page  
[DVD]  
Pressing the DISPLAY button on the  
[AUDIO]  
Pressing the display button displays  
When the SETUP button is pressed, the setup menu will be displayed as shown  
below. Select the menu category and make changes according to your preferences.  
remote control changes the play mode as information about the current CD on the  
follows:  
screen as follows:  
1. Press the STOP button if the disc is playing.  
OSD  
CONDITION  
OSD  
CONDITION  
2. Press the SETUP button to display setup menu.  
Single Elapsed  
Display the single elapsed  
Display the Title Elapsed  
Display the Title Remain  
Title Elapsed  
Title Remain  
Single Remain  
Total Elapsed  
Display the single remain  
Display the total elapsed  
Display the total remaining  
Display the Chapter Elapsed  
Display the Chapter Remaining  
No sign  
Chapter Elapsed  
Chapter Remain  
Total Remain  
General Setup Page  
Display Off  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
ENG  
On  
[VCD]  
[MP3]  
Your DVD player will display the counter  
automatically when you play the MP3 disc.  
Whenever press the button,title chapter  
will be displayed as follows:  
Screen Saver  
OSD  
CONDITION  
Display time  
Single Elapsed  
Single Remain  
Display Off  
Left display time  
No sign  
Go To General Setup PPaaggee  
Number Buttons  
[DVD]  
3. Use the (arrow and ENTER) buttons to select and set desired settings.  
The 0 through 9 number buttons are used to enter the number of the track, the number  
of the DVD chapter, the time, the date, etc.  
4. Press the SETUP button again to turn off the setup menu.  
[AUDIO]  
OSD  
CONDITION  
Select a track by pressing the  
corresponding number button.  
Select Track:__  
Select track no  
[DVD]  
OSD  
CONDITION  
You can select a track in the folder by  
pressing the corresponding number button.  
__:__  
Select track no  
14  
27  
DVD Setup  
DVD Functions  
General Setup  
Stop(  
)
1. TV Aspect Ratio  
[DVD]/[AUDIO]  
OSD  
CONDITION  
Stop  
In the Setup function called TV Display, you set the player to output the video signal at the  
same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.  
If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B  
(Letterbox).  
In DVD mode, Press STOP to stop playback.  
To resume playback, press PLAY/PAUSE. If  
you press STOP and then PLAY/PAUSE twice,  
the player will begin playback at the first  
scene of the movie.  
1 Time Press Play Key To Continue  
2 Time  
Disc Stop  
Normal / PS 4:3 PAN SCAN  
Choose this setting if you want the movie to fill the entire screen.  
(This might mean that the left and right edges won t be seen)  
[MP3]  
OSD  
CONDITION  
In MP3 mode, Pressing STOP will stop the  
audio playback. Press PLAY/PAUSE to begin  
playback of the first title on the disc.  
Normal / LB 4:3  
Choose this setting if you want to see the movie in its original aspect ratio.  
(The movie might appear with black bars at the top and bottom of the screen.)  
1 Time  
Stop  
Stop  
Wide 16:9 WIDE SCREEN  
Choose this setting if your DVD Player is connected to a widescreen TV.  
(This opition is available only if the disc has a 16:9 display aspect ratio.)  
Arrows( / / /  
[DVD]  
In addition to navigating the various menus, you can use the arrow buttons to define the area  
)
of the screen you want to enlarge in ZOOM mode.  
General Setup Page  
[MP3]  
After pressing STOP button, select the desired folder and set the condition by pressing  
ENTER button.  
TV Display  
Angle Mark  
OSD Lang  
PS  
Normal/PS  
Normal/LB  
Wide  
On  
ENG  
On  
Screen Saver  
2. Angle Viewing  
Set TV Display Mode  
Some DVD discs contain programming which allows you  
to view a scene from a few different camera angles. You  
can tell when a scene is so recorded when an Angle Mark  
is displayed on the screen. This mark will only appear if you  
have enabled the Angle Mark feature  
Setup  
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVD  
settings to suit your equipment and preferences.  
General Setup Page  
TV Display  
PS  
Angle Mark  
OSD Lang  
Screen Saver  
On  
ENG  
On  
On  
Off  
in the DVD Setup menu.  
On: When selected, the screen will be shown with  
angle mark.  
Menu  
[DVD]  
Off: When selected, no angle mark is shown on  
the screen.  
Set Angle Mark  
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,  
depending on the programming of the disc.  
3. OSD Language  
General Setup Page  
English  
Korean  
French  
TV Display  
PS  
Use this option to set the OSD language.  
When selected, change to set the on-screen display  
language.  
Angle Mark  
OSD Lang  
Screen Saver  
On  
ENG  
On  
German  
Italian  
Spanish  
Portuguese  
Dutch  
Set OSD Language  
26  
15  
DVD Setup  
DVD Functions  
Eject  
4. Screen Saver  
General Setup Page  
When this button is pressed, the disc is ejected. When this button is pressed for more  
than 3 seconds, the disc is unconditionally ejected. Use this function if you encounter  
difficultly ejecting a disc.  
The screen saver is useful to prevent your display  
from becoming damaged. The screen saver picture  
appears when you leave the DVD player in stop mode  
for about two minutes.  
TV Display  
PS  
Angle Mark  
OSD Lang  
Screen Saver  
On  
ENG  
On  
On  
Off  
Vol+/Vol-  
Screen Saver  
Use these buttons to adjust the audio output level of the speaker from 0 to 20.  
Mute  
OSD  
CONDITION  
Mute  
Press MUTE to turn off the audio part of the  
currently playing program. Press it again to  
return the audio volume to the level at which  
you were last listening.  
Mute  
Mute off  
Mute off  
Play or Pause(  
)
Audio Setup  
OSD  
CONDITION  
Play Disc  
Whenever this button is pressed, the mode  
switches from pause to play or play to pause.  
Pause  
Audio Setup Page  
Audio  
[DVD]  
Speaker Setup  
SPDIF Setup  
OSD  
CONDITION  
2 Channel  
Change the audio output format.  
(Available only if the disc supports available audio  
type.)  
1 / 2 : Ac3 2CH English  
Dolby Digital Setup  
Channel Delay  
Equallizer  
2 / 2 : Ac3 5.1CH English  
5.1 Channel  
OSD  
Stereo  
CONDITION  
Stereo  
[VCD]/[AUDIO]  
3D Processing  
Changes the audio output format.  
(Available only of the disc supports available audio  
type.)  
Mono Left  
Mono Right  
Mix Mono  
Mono Left  
Mono Right  
Mix Mono  
[MP3]  
An invalid button press.  
Go To Speaker Setup PPaaggee  
16  
25  
DVD Setup  
DVD Setup  
Show below are two examples of Audio Setups.  
Password Setup  
1. Password Mode  
Password Setup, which is required for using the Parental Controls settings,  
is divided into two modules: Turning on the Password function, and setting  
a Password. The first step is to turn it on in the Password Mode setting.  
1. Dolby Digital Setup  
Audio Setup Page  
Password Setup Page  
Dolby Digital Setup  
Speaker Setup  
SPDIF Setup  
Password Mode On  
Password  
On  
Off  
Dual Mono  
Dynamic  
STR  
Stereo  
L-Mono  
R-Mono  
Mix-Mono  
Dolby Digital Setup  
Channel Delay  
Equalizer  
3D Processing  
Go To Dolby Digital Setup  
Password Mode  
Dual Mono (1 + 1) Setup  
Dual Mono  
Use this function to set the input audio  
signal to match your speaker setup.  
Dynamic  
Use this function to change the setting  
from the factory.  
2. Password Change  
In the Password setup, you must first enter the current 6-digit passcode, and  
then you have the opportunity to change it. The factory default passcode is 136900.  
Once you have changed and confirmed the password, press the ENTER button.  
Dolby Digital Setup  
Dolby Digital Setup  
FULL  
Dual Mono  
Dynamic  
STR  
Dual Mono  
Dynamic  
Stereo  
STR  
L-Mono  
R-Mono  
Mix-Mono  
3 / 4  
1 / 2  
1 / 4  
OFF  
Password Setup Page  
Password Mode On  
Password  
On  
Change  
Old Password  
New Password  
Confirm PWD  
Set DRC Off  
Set Stereo Setup  
OK  
2. Equalizer Settings  
Change Password  
Please Enter Old Password  
Audio Setup Page  
Equalizer Page  
Speaker Setup  
Spdif Setup  
EQ Type  
None  
None  
Rock  
Pop  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
Dolby Digital Setup  
Channel Delay  
Equalizer  
Live  
Dance  
Techno  
Classic  
Soft  
3D Processing  
Go To Equalizer Page  
Select Equalizer Type  
24  
17  
DVD Setup  
DVD Setup  
5. Disc Menu  
Use the Disc Menu option to select the display  
language for a DVD s disc menu display language.  
(not the same as the players menu)  
EQ Equalizer Type  
In this menu you can choose the desired preset  
equalizer mode.  
Preference Page  
Equalizer Page  
EQ Type None  
English  
French  
Spanish  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
None  
Rock  
Pop  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
1. Press the SETUP button during stop mode.  
(Choose from Rock, Pop, Live, Dance, Techno,  
Classic or Soft)  
Subtitle  
Disc Menu  
Parental  
Default  
Chinese  
Japanese  
Korean  
Russian  
Thai  
Live  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Disc Menu.  
ENG  
Dance  
Techno  
Classic  
Soft  
4. Press the ENTER button.  
5. Press the  
/
buttons to select Disc Menu.  
Select Equalizer Type  
Preferrred Meenu Lannguage  
6. Parental  
The Parental Control settings limit the player to only play content at or below a certain  
movie rating. The ratings systems in different countries vary. In the USA, the Motion  
Picture Association of America(MPAA) rates movies as G, PG, PG-13, etc.  
In this menu item, you can set what is the highest level of rating you wish to allow the  
unit to play.  
Bass Boost  
The Bass Boost function increases the volume  
level of the bass frequencies.  
Equalizer Page  
EQ Type  
None  
Off  
Off  
Bass Boost  
Super Bass  
Treble Boost  
On  
Off  
Off  
1. Press the SETUP button when stop mode.  
Preference Page  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Parental.  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
1 KID SAF  
2 G  
3 PG  
Boss Boost  
4. Press the ENTER button.  
5. Press the buttons to select desired  
parental level.  
Subtitle  
Disc Menu  
Parental  
Default  
4 PG 13  
5 PGR  
6 R  
ENG  
/
7 NC17  
8 ADULT  
Super Bass  
Super Bass Boost further increases the volume  
level of the bass frequencies.  
Equalizer Page  
EQ Type None  
7. Default  
Set Parental CControl  
If you select RESET when in the DEFAULT settings  
mode, all the settings of the Setup Menu will be  
returned to the factory defaut settings, except for  
Parental Level, Region and Password values.  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
On  
Off  
Preference Page  
TV Type  
PBC  
Audio  
Subtitle  
Disc Menu  
Parental  
Default  
Ntsc  
On  
ENG  
Super Bass  
1. Press the SETUP button when stop mode.  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Default.  
ENG  
4. Press the ENTER button to select Reset.  
Reset  
Treble Boost  
Treble Boost increases the volume level of the upper  
frequencies.  
Equalizer Page  
EQ Type None  
Load Factory Setting  
Bass Boost  
Super Bass  
Treble Boost  
Off  
Off  
Off  
On  
Off  
Treble Boost  
23  
18  
DVD Setup  
DVD Setup  
Preference  
1. TV Type  
Choose the proper TV format appropriate to the  
monitor you have connected to the player from  
the following: NTSC, PAL or Multi type.  
Video Setup  
Picture Quality  
In the Video Setup, you can make adjustments to various elements of the picture quality.  
Preference Page  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
PAL  
Multi  
NTSC  
1. Press the SETUP button during stop mode.  
Subtitle  
Disc Menu  
Parental  
Default  
Videoo Setup Page  
Video Quality Setup  
ENG  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to TV Type.  
Component  
Quality  
YUV  
Color  
MID  
00  
00  
None  
00  
00  
High  
Medium  
Low  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
4. Press the ENTER button.  
5. Press the buttons to select TV Type.  
Divx VOD  
/
Set TV Standard  
1 T  
2. PBC (Play Back Control)  
This feature is only available when a SVCD disc  
is loaded. It allows you to disable or enable the  
PBC (Play Back Control) menu of VCD discs.  
Preference Page  
Go TO Video Quality Setup Page  
Color  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
On  
Off  
Subtitle  
Disc Menu  
Parental  
Default  
ENG  
Sharpness can be adjusted by highlighting it in the menu and then using the  
UP/DOWN arrow buttons to increase or decrease the sharpness.  
1. Press the SETUP button during stop mode.  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to PBC.  
4. Press the ENTER button.  
5. Press the  
Set PBC State  
/
buttons to select TV TypeOn/Off.  
Video Quality Setup  
Color  
MID  
00  
00  
None  
00  
00  
High  
Medium  
Low  
3. Audio  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
Use the audio language menu to select the subtitle  
language that you prefer. If the disc you are playing  
has that language available, it will display subtitles  
in that language.  
Preference Page  
1 T  
English  
French  
Spanish  
TV Type  
PBC  
Audio  
Ntsc  
On  
ENG  
Color  
Subtitle  
Disc Menu  
Parental  
Default  
Chinese  
Japanese  
Korean  
Russian  
Thai  
ENG  
1. Press the SETUP button during stop mode.  
2. Press the  
3. Press the  
/
/
buttons to move to Preference.  
buttons to move to Audio.  
Brightness  
Use this option to adjust the display brightness. When you reach desired  
4. Press the ENTER button.  
5. Press the buttons to select desired  
audio language.  
Preferredd Audio Language  
/
brightness level, use the  
/
buttons and press the ENTER button.  
4. Subtitle  
In the Subtitle menu, you can select a subtitle  
language. Please note that subtitle will only  
appear in this language if the disc programming  
has included it.  
Video Quality Setup  
Preference Page  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
TV Type  
PBC  
Audio  
French  
Spanish  
Ntsc  
On  
ENG  
0
Brightness  
Chinese  
Japanese  
Korean  
Russian  
Thai  
Subtitle  
Disc Menu  
Parental  
Default  
1. Press the SETUP button during stop mode.  
ENG  
1 T  
2. Press the  
3. Press the  
4. Press the ENTER button.  
/
buttons to move to Preference.  
/
buttons to move to Subtitle.  
Others  
Brightness  
Brightness  
5. Press the  
subtitle.  
/
buttons to select desired  
Preferredd Subtitle Language  
22  
19  
DVD Setup  
DVD Setup  
Contrast  
Use this option to adjust the contrast level.  
Saturation  
Select screen saturation level using the direction  
ENTER button.  
/
buttons and press the  
Use the  
/
buttons and press the ENTER button, when you reach the  
desired contrast level. The contrast control increases or decreases the ratio of  
bright and dark screen sections.  
Video Quality Setup  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
Saturation  
0
Video Quality Setup  
1 T  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
Saturation  
Contrast  
0
Saturation  
1 T  
Luma Delay  
Select the Luma Delay menu and select the preferred video image quality.  
Contrast  
Contrast  
Video Quality Setup  
Gamma  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
In some systems, you might experience a loss in the strength of the dark sections of  
the displayed picture. This can be helped by changing the Gamma setting, which  
boosts the dark level but leaves the other levels unchanged.  
1 T  
0T  
1 T  
Luma Delay  
Video Quality Setup  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
High  
Medium  
Low  
None  
1 T  
Gamma  
Hue  
Select screen hue level using the direction  
/
buttons and press the ENTER button.  
Video Quality Setup  
Color  
MID  
00  
00  
None  
00  
00  
Brightness  
Contrast  
Gamma  
Hue  
Saturation  
Luma Delay  
Hue  
0
1 T  
Hue  
Hue  
20  
21  

Atlantis Land I STORM USB A01 AU1 User Manual
Blaupunkt CANBERRA 7 647 523 310 User Manual
Canon Camcorder 30D User Manual
Canon EF Lens 4411B002 User Manual
Clarion VMA7483 User Manual
Cres Cor Star Series Carving Stations IFW61WF User Manual
Dicota Hypertec N16408NHY User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System 82912A User Manual
Interfire Audio G1 2000 User Manual
Jabra PRO 9400 User Manual