Clarion DXZ778RUSB User Manual

CAUTIONS:

OBS!

This appliance contains a laser system

and is classified as a “CLASS 1 LASER

PRODUCT”. To use this model properly,

read this Owner’s Manual carefully and

keep this manual for your future

Apparaten innehåller laserkomponenten

som avger laserstrålning överstigande

gränsen för laserklass 1.

reference. In case of any trouble with

this player, please contact your nearest

“AUTHORIZED service station”. To

prevent direct exposure to the laser

beam, do not try to open the enclosure.

VAROITUS

Suojakoteloa si saa avata. Laite sisältää

laserdiodin, joka lähettää näkymätöntä

silmille vaarallista lasersäteilyä.

Owner’s manual

Mode d’emploi

Bedienungsanleitung

Istruzioni per l’uso

Gebruiksaanwijzing

Manual de instrucciones

Bruksanvisning

!CAUTION

USE OF CONTROLS OR

ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE

SPECIFIED IN THE OWNER’S MANUAL

MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

Manual de instruções

DXZ778RUSB

ADVARSEL.

Denne mærking er anbragt udvendigt

på apparatet og indikerer, at apparatet

arbejder med laserstråler af klasse 1,

hvilket betyder, at der anvendes

laserstråler af svageste klasse, og at

man ikke på apparatets yderside kan

blive udsat for utilladelig kraftig

stråling.

APPARATET BØR KUN ÅBNES AF

FAGFOLK MED SÆRLIGT KENDSKAB

TIL APPARATER MED

LASERSTRÅLER!

Indvendigt i apparatet er anbragt den

her gengivne advarselsmækning, som

advarer imod at foretage sådanne

indgreb i apparatet, at man kan komme

til at udsaætte sig for laserstråling.

CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL

AUTORADIO CD/USB/MP3/WMA / AVEC COMMANDE CeNET

CD/USB/MP3/WMA/AAC-RECEIVER MIT CeNET-STEUERUNG

SINTOLETTORE CD/USB/MP3/WMA/AAC CON CONTROLLO

CeNET

CD/USB/MP3/WMA/AAC-RADIO-COMBINATIE MET

CeNET-BEDIENING

RECEPTOR DE CD/USB/MP3/WMA/AAC CON CONTROL CeNET

CD/USB/MP3/WMA/AAC-RADIO MED CeNET-KONTROLL

RECEPTOR CD/USB/MP3/WMA/AAC COM CONTROLO CeNET

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.

Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.

Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.

DXZ778RUSB

Thank you for purchasing this Clarion product.

CONTROLS/LES COMMANDES/BEDIENELEMENTE/CONTROLLI

BEDIENINGSORGANEN/CONTROLES/KONTROLLER/CONTROLOS

∗ Please read this owner’s manual in its entirety before operating this equipment.

∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).

∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.

∗ This manual includes the operating procedures of the iPod interface, CD/DVD changer, DAB

and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer and TV

tuner have their own manuals, but no explanations for operating them are described.

“iPod” is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

Main unit / Appareil principal / Hauptgerät / Apparecchio principale

Hoofdapparaat / Unidad principal / Huvudenhet / Unidade principal

[

]

[

]

OPTION

Contents

]

ENT

[

]

SRC

[

]

SEEK PANEL

CONTROLS................................................................................................................................. ii

[

]

RELEASE

1. PRECAUTIONS..................................................................................................................... 3

Sloping Console.....................................................................................................................3

Handling Compact Discs........................................................................................................4

2. NOMENCLATURE ................................................................................................................ 5

Names of the Buttons and Their Functions............................................................................5

Display Items .........................................................................................................................6

LCD Screen ...........................................................................................................................6

[

]

VOL

[

]

P.CH

3. DCP ....................................................................................................................................... 7

4. REMOTE CONTROL............................................................................................................. 8

Functions of Remote Control Unit Buttons.............................................................................8

Inserting the Battery.............................................................................................................10

[

] (SOUND)

[

] (EJECT)

] (MUTE)

[

]

[

5. OPERATIONS..................................................................................................................... 11

Basic Operations..................................................................................................................11

Radio Operations.................................................................................................................20

RDS Operations...................................................................................................................22

CD/MP3/WMA/AAC Operations...........................................................................................26

Operations Common to Each Mode.....................................................................................30

[

]

IR RECEIVER

[

]

TITLE

With the SLOPING CONSOLE opened / Ouvrez la CONSOLE INCLINABLE

Bei geöffneter SCHRÄGKONSOLE / Con la CONSOLLE INCLINATA aperta

Met de SCHUINE CONSOLE geopend / Apertura de la CONSOLA INCLINABLE

Med den LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta

6. OPERATIONS OF ACCESSORIES.................................................................................... 34

USB Operations...................................................................................................................34

iPod BB Operations .............................................................................................................36

CD Changer Operations ......................................................................................................38

DVD Changer Operations....................................................................................................40

TV Operations......................................................................................................................41

Digital Radio / DAB Operations............................................................................................42

[

CD SLOT]

7. IN CASE OF DIFFICULTY .................................................................................................. 45

8. ERROR DISPLAYS............................................................................................................. 47

9. SPECIFICATIONS............................................................................................................... 48

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.

Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.

Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

Observera: Vik ut denna sida för att kunna se bilderna över bilstereons framsida, medan du läser de olika kapitlen.

Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.

DXZ778RUSB

1. PRECAUTIONS

1. This unit is applicable for on-road 4 wheel

vehicle purpose only. Use for tractor, fork

truck, bulldozer, off road vehicle, 2 or 3

wheel motor bicycle, marine boat or other

special purpose vehicle is not appropriate.

Sloping Console

This unit uses sloping console to make large-

screen displays possible.

When you use the sloping console, be sure to

close it.

2. When the inside of the car is very cold and

the player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper

CAUTION

BE CAREFUL NOT TO GET YOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE SLOPING CONSOLE.

playback may not be possible. If moisture

forms on the disc, wipe it off with a soft cloth.

If moisture forms on the optical parts of the

player, do not use the player for about one

hour. The condensation will disappear

naturally allowing normal operation.

1. For safety’s sake, always close the

SLOPING CONSOLE before leaving this unit

unused for a prolonged period or switching

OFF the ignition key.

3. Driving on extremely bumpy roads which

cause severe vibration may cause the sound

to skip.

If you switch OFF the ignition key with the

SLOPING CONSOLE tilted, the SLOPING

CONSOLE does not close.

INFORMATION FOR USERS:

2. Before the SLOPING CONSOLE closes,

there may be a braking sound from the

safety mechanism. This is normal.

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY.

3. If you move the SLOPING CONSOLE by

hand, this may create play. To correct this

play, with the power on for the unit, press the

[Q] button to close the SLOPING

CONSOLE.

4. After a disc is ejected, the SLOPING

CONSOLE automatically returns to the tilted

or closed state. If there is any obstruction

when the SLOPING CONSOLE tries to

close, the safety mechanism is triggered and

the SLOPING CONSOLE returns to the open

state. If this happens, remove the

obstruction, then press the [Q] button.

5. To avoid scratching the compact disk, keep

the CD level when inserting or removing

them.

DXZ778RUSB

Handling Compact Discs

Use only compact discs bearing the

Storage

• Do not expose compact discs to direct

sunlight or any heat source.

mark.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

• Do not expose compact discs to excess

humidity or dust.

Some CDs recorded in CD-R/CD-RW mode

may not be usable.

• Do not expose compact discs to direct heat

from heaters.

Handling

Cleaning

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

Therefore, do not leave them for a long time

in the car.

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the

center of the compact disc to the

circumference.

• Do not use any solvents, such as

commercially available cleaners, anti-static

spray, or thinner to clean compact discs.

• New discs may

Ball-point pen

have some

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

roughness

Roughness

around the

edges. If such

discs are used,

the player may

not work or the

sound may

skip. Use a ball-point pen or the like to

remove any roughness from the edge of the

disc.

• Never stick labels on the surface of the

compact disc or mark the surface with a

pencil or pen.

• Never play a compact disc with any

cellophane tape or other glue on it or with

peeling off marks. If you try to play such a

compact disc, you may not be able to get it

back out of the CD player or it may damage

the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use

of such discs may cause misoperation or

damage.

• To remove a compact disc from its storage

case, press down on the center of the case

and lift the disc out, holding it carefully by the

edges.

• Do not use commercially available CD

protection sheets or discs equipped with

stabilizers, etc. These may damage the disc

or cause breakdown of the internal

mechanism.

DXZ778RUSB

2. NOMENCLATURE

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Names of the Buttons and Their Functions

[RELEASE] button

• Deeply push in the button to unlock the DCP.

[P.CH] button

• Push the button upward or downward to recall

the stored station while in the radio mode.

[SRC] button

• Press the button to turn on the power.

• Select the folder while in the MP3/WMA/AAC

mode.

• Press and hold the button for 1 second or

longer to turn off the power.

• Perform various settings.

[

] (SOUND) button

• Switch the operation mode among the radio

mode, etc.

• Press the button to enter the sound mode.

• Press and hold the button for 1 second or

longer to enter the sound setting mode.

[OPTION] button

• Press the button to enter the option mode.

[TA] button

• Use the button to set the TA (Traffic

• Press and hold the button for 1 second or

longer to enter the adjust mode.

Announcement) standby mode.

[SEEK PANEL]

[IR RECEIVER]

• Receiver for remote control unit. (Operating

range: 30° in all directions)

• The [SEEK PANEL] allows the controls on

the ends to be moved to right or left to permit

station tuning (radio), track selection (CD),

and to perform various settings in the

adjustment mode.

[TITLE] button

• Use the button to switch the user titles or

track titles, etc. while in the CD/MP3/WMA/

AAC mode.

• Press and hold the button to switch the

display indication (Action display, Title display

and CT (clock time) display).

[

] (MUTE) button

• Turn mute on or off.

[MENU] button

• Switch the band, or seek tuning or manual

tuning while in the radio mode.

[Q] (EJECT) button

• Press to open the SLOPING CONSOLE and

insert a CD into the CD SLOT.

• Press the button to enter the list search mode

while in the CD/MP3/WMA/AAC mode.

• Press to eject a CD loaded in the unit.

[VOL] button

• Push the button upward or downward to

adjust the volume.

• Press the button to change the character.

• Press and hold the button for 1 second or

longer to play the first track while in the CD/

MP3/WMA/AAC mode.

[CD SLOT]

• CD insertion slot.

[

] button

• Play or pause a track while in the CD/MP3/

WMA/AAC mode.

• Press the button to enter the preset memory

mode (radio).

• Confirm various settings.

DXZ778RUSB

Display Items

Source indication

•

FM1-3, AM : Radio mode

•

Radio mode: Preset No. / frequency

CD mode : Track No. / playback time

MP3/WMA/AAC mode

: Folder No. /track No. / playback time

CD / DVD changer mode

: Disc No. / track No. / playback time

TV mode : Preset No. / channel

M1-3

USB

iPod

: DAB mode

: CD/MP3/WMA/AAC mode

: USB mode

: iPod BB mode

•

CDC1-4 : CD changer mode

DVDC1-4 : DVD changer mode

TV1-2

AUX

TEL

: TV mode

: AUX mode

: Telephone mode

CT(clock time)

indication

Operation status indication

Titles indication

Source icon

(3 patterns)

: MP3/WMA/AAC indication

: Manual indication

WMA

MANU

REG

: Disc/Folder random

: Disc/Folder repeat

: Disc/Folder scan

: Track random

: Track repeat

: Track/Preset/Service scan

: Auto store

A.RDM

A.RPT

A.SCN

RDM

RPT

SCN

: Alternative frequency indication

: Regional indication

: Traffic announcement indication

: Traffic programme indication

: Programme type indication

: DAB indication

: Information indication for DAB

: Digital Z-Enhancer indication

: Sound restorer indication

PTY

DAB

INFO

DZE

: Stereo indication (radio only)

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

DXZ778RUSB

3. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

Attaching the DCP

1. Insert the DCP so that the Asection on the

right side of the DCP catches on the hook B

on the unit.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. With the SLOPING CONSOLE closed, turn

off the power.

2. Press the [RELEASE] button deeply to open

the DCP.

[RELEASE] button

2. Press the left side Cof the DCP carefully to

fit it in place.

3. Pull the DCP toward you and remove it.

CAUTION

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

• If the [RELEASE] button is pressed and

the DCP is not locked into place, it may fall

out from vibration of the car. This can

break the DCP, so after removing it, either

install it on the unit or put it in its DCP

case.

DCP

CAUTION

• Always close the SLOPING CONSOLE

before removing the DCP.

• The connector connecting the unit and the

DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

• If you remove the DCP with the SLOPING

CONSOLE open, the SLOPING CONSOLE

closes immediately. Be careful not to get

your fingers caught.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DXZ778RUSB

4. REMOTE CONTROL

Functions of Remote Control Unit Buttons

∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main

unit.

Signal transmitter

[

]

[

]

SRC

BND

]

[

], [

[

], [

]

[

MUTE

DISP

[

]

PTY

[

]

[

]

PS/AS

[AF] button

• Press to cancel an emergency broadcast

during an ALARM interrupt.

● Shared modes

[SRC] button

• Use to alternate operation mode among the

various modes.

[PTY] button

• Press to cancel a PTY broadcast during a

PTY interrupt.

• Press to cancel a traffic announcement

broadcast, an emergency broadcast, and a

PTY broadcast during a TA, ALARM or PTY

interrupt.

[DISP] button

• Press to alternate among action display, title

display and CT (clock time) display etc.

[w], [z] buttons

• Increases and decreases volume.

● Radio (RDS) / DAB modes

[BND] button

[MUTE] button

• Turns mute function on and off.

• Switches reception band.

[TA] button

• TA on and off.

[x], [v] buttons

• Moves preset channels up and down.

• Press to cancel a traffic announcement

broadcast during a TA interrupt.

[PS/AS] button

• Press to perform preset scan.

• Press and hold the button for 2 seconds or

longer to perform auto store.

DXZ778RUSB

Functions of Remote Control Unit Buttons

[AF] button

• AF function on and off.

[AF] button

• Press to perform repeat play.

• Press and hold the button for 1 second or

longer to perform REG function on and off.

• Press and hold the button for 1 second or

longer to perform disc repeat play.

[PTY] button

• PTY mode on and off.

[PTY] button

• Press to perform random play.

• Press and hold the button for 1 second or

longer to perform disc random play.

● CD/MP3/WMA/AAC and USB

modes

● iPod BB mode

[BND] button

• Press to play the first track.

[x], [v] buttons

• Press to move the tracks up and down.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[

] button

• Switches between playback and pause.

[

] button

• Switches between playback and pause.

[AF] button

• Press to perform repeat play.

[PS/AS] button

• Press to perform scan play.

• Press and hold the button for 1 second or

longer to perform all repeat play.

• When in MP3/WMA/AAC and USB modes,

press and hold the button for 1 second or

longer to perform folder scan play.

[PTY] button

• Press to perform random play.

[AF] button

• Press to perform repeat play.

• Press and hold the button for 1 second or

longer to perform all random play.

• When in MP3/WMA/AAC and USB modes,

press and hold the button for 1 second or

longer to perform folder repeat play.

● TV mode

[BND] button

• Switches reception band.

[PTY] button

• Press to perform random play.

[x], [v] buttons

• When in MP3/WMA/AAC and USB modes,

press and hold the button for 1 second or

longer to perform folder random play.

• Moves preset channels up and down.

[PS/AS] button

• Press to perform preset scan.

• Press and hold the button for 2 seconds or

longer to perform auto store.

● CD changer/DVD changer modes

[BND] button

• Press to switch to next disc in ascending

order.

[PTY] button

• Press to alternate between TV and VTR.

[x], [v] buttons

• Press to move the tracks up and down.

• Press and hold the button for 1 second or

longer to perform fast-forward/fast-backward.

[

] button

• Switches between playback and pause.

[PS/AS] button

• Press to perform scan play.

• Press and hold the button for 1 second or

longer to perform disc scan play.

DXZ778RUSB

Inserting the Battery

1Turn over the remote control unit and slide

the cover in the direction indicated by the

arrow in the illustration.

2Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing

upwards.

3Press the battery in the direction indicated by

the arrow so that it slides into the

compartment.

4Replace the cover and slide in until it clicks

into place.

Notes:

Misuse may result in rupture of the battery,

producing leakage of fluid and resulting in personal

injury or damage to surrounding materials. Always

follow these safety precautions:

Insertion guide

• Use only the designated battery.

• When replacing the battery, insert properly, with

+/– polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire

or water. Do not attempt to disassemble the

battery.

• Dispose of used batteries properly.

DXZ778RUSB

5. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “CONTROLS” on page ii (unfold).

Basic Operations

● 2way speaker system (2WAY)

CAUTION

Tweeter (left)

Tweeter (right)

Be sure to lower the volume before

Front speaker

(left)

Front speaker

(right)

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

hearing and damage the unit.

Rear speaker

(left)

Rear speaker

(right)

1. Push the [SEEK PANEL] leftward or

Selecting speaker system

When this product is turned on for the first time,

it allows you to select a speaker system.

rightward to select the setting.

Each time you push the [SEEK PANEL]

leftward or rightward, the setting change in

the following order:

Speaker system

Speaker Speaker configuration

system

“NORMAL” ↔ “3WAY” ↔ “2WAY” ↔

“NORMAL”...

NORMAL Front 2ch Rear 2ch Subwoofer 2ch

(Normal)

2. Press the [

] button.

3. Push the [SEEK PANEL] leftward or

3WAY

(3way)

High 2ch Mid 2ch

Subwoofer 2ch

Rear 2ch

rightward to select “OK” or “CANCEL”.

4. Press the [

setting.

∗ Refer to the section “Adjusting Sound Mode”

(page 13) and “Adjusting Sound Setting Mode”

(page 17).

] button to store the

2WAY

(2way)

● Normal speaker system (NORMAL)

Note:

• The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHECK” appears in the

display, then the unit returns to the selecting

speaker system.

Front speaker

(left)

Front speaker

(right)

Rear speaker

(left)

Rear speaker

(right)

Subwoofer

System check function

● 3way speaker system (3WAY)

If you change your speaker system while the

power of this unit is on, perform the System

check function to select the appropriate speaker

system again. See “Performing a system

check” (page 33) for details.

Tweeter (right)

Tweeter (left)

Front speaker

(left)

Front speaker

(right)

CAUTION

Select the speaker system suited to your

speaker configuration. Failing to do so can

damage your speakers.

Subwoofer

DXZ778RUSB

Basic Operations

Turning on/off the power

Switching the display

Note:

1. Each time you press and hold the [TITLE]

button for 1 second or longer, the display

switches in the following order:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

Action display ➜ Title display ➜ CT (clock

time) ➜ Action display...

∗ When CT data is not received, “– –:– –CT”

appears in the display.

1. Press the [SRC] button.

The mode that was previous active is

displayed.

Mute

2. Press and hold the [SRC] button for 1

second or longer to turn off the power for the

unit.

Use this function to turn off the sound

immediately.

1. Press the [ ] button.

The sound turns off and “MUTE” blinks in the

display.

Selecting a mode

1. Press the [SRC] button to change the

2. Press the [ ] button again to cancel the

mute mode.

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio ➜ (DAB) ➜ CD/MP3/WMA/AAC ➜

USB ➜ (iPod BB) ➜ (CD changer) ➜ (DVD

changer) ➜ (TV) ➜ AUX ➜ Radio...

∗ External equipment not connected with

CeNET is not displayed.

Adjusting the volume

1. Push the [VOL] button upward or downward

to adjust the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

DXZ778RUSB

Basic Operations

● Adjusting the subwoofer output

volume

Adjusting Sound Mode

You can adjust the volume output from the unit’s

subwoofer output terminal.

To change sound mode

“S-W VOLUME” can be adjusted only when

“SUB WOOFER” is set to “ST” or “MONO”

(page 20).

1. Press the [ ] button and select the sound

mode to adjust.

2. Push the [SEEK PANEL] leftward or

2-1. Select the “S-W VOLUME”.

rightward to select the “item name”.

3-1. Push the [P.CH] button upward or

downward to change the output volume.

∗ The factory default setting is “0”.

(Setting range: +6 to –6)

● Setting the Digital Z-Enhancer

This unit are provided with 3 types of sound

tone effects stored in memory. Select the one

you prefer.

When speaker system is “NORMAL”:

“S-W VOLUME” ↔ “DZE” ↔ “P.EQ” ↔

“BASS” ↔ “TREBLE” ↔ “S RESTORER”

↔ “HPF” ↔ “S-W LPF” ↔ “BALANCE” ↔

“FADER”

∗ The factory default setting is “DZE OFF”.

2-1. Select the “DZE”.

When speaker system is “3WAY”:

3-1. Press the [

] button.

“S-W VOLUME” ↔ “DZE” ↔ “P.EQ” ↔

“BASS” ↔ “TREBLE” ↔ “S RESTORER”

↔ “BALANCE”

3-2. Push the [SEEK PANEL] leftward or

rightward to select the tone effect. Each

time you push the [SEEK PANEL], the tone

effect changes in the following order:

When speaker system is “2WAY”:

“DZE” ↔ “P.EQ” ↔ “BASS” ↔ “TREBLE”

↔ “S RESTORER” ↔ “BALANCE” ↔

“FADER”

“DZE OFF” ↔ “DZE 1” ↔ “DZE 2” ↔ “DZE

3”

DZE OFF : No sound effect

3. Push the [P.CH] button upward or

downward to select the “desired setting

value”.

DZE 1

DZE 2

: Suitable for genuine speakers

: Suitable for separate

speakers

∗ In the case of item names appearing with

the “ENT” suffix after the item name, the

DZE 3

: Suitable for co-axial speakers

[

] button must be pressed to display

3-3. When the “DZE 1”, “DZE 2” or “DZE 3” is

set, push the [P.CH] button upward or

downward to change the DZE level from +3

to –3.

the setting value.

∗ “P.EQ” can be adjusted only when the

“P.EQ ON/OFF” is set to “ON” (page 20)

and “EQ SELECT” is set to “P.EQ” (page

20).

∗ The factory default setting is “0”.

∗ “BASS” and “TREBLE” can be adjusted

only when “DZE” is set to “DZE OFF” (page

13) and “EQ SELECT” is set to “B/T” (page

20).

∗ After completing settings, press the [

button to return to the previous mode.

]

Note:

• During sound adjustment mode, if no operation

is performed for more than 10 seconds, this

mode can be canceled and return to the

previous mode.

DXZ778RUSB

Basic Operations

● Compensation

● Setting P.EQ

There is no need to compensate frequency

characteristics if they are flat (no peaks or

valleys) when you have measured the

frequency characteristics with a measuring

device. However, sometimes the frequency

characteristics rise or fall in some places. If this

happens, the frequency characteristics must be

compensated. Create a frequency curve having

characteristics that are opposite to the center

frequency of parts where the characteristics rise

and fall to cancel out these peaks and values,

and make the frequency characteristics as flat

as possible.

P.EQ (Parametric Equalizer) allows you to

compensate the entire frequency level range in

detail by smooth curve using frequency

compensation matched to the type of your car.

The item corresponding to the system set in the

section “Selecting speaker system” (page 11)

will be displayed.

2-1. Select “P.EQ”.

3-1. Press the [

] button.

When speaker system is “NORMAL”:

3-2. Push the [SEEK PANEL] leftward or

rightward and select from:

Making the frequency characteristics as flat as

possible is called “Compensation”.

“SEDAN-1”

“MINI VAN-2”

P.EQ basic menu

↔

“SEDAN-2”

↔

“MINI VAN-1”

“USER”...

↔

“WAGON”

↔

On this unit, frequency characteristics can be

compensated by P.EQ (Parametric Equalizer).

Speaker Mounting

position

No. Display name

● Compensation of frequency

characteristics

SEDAN-1

(sedan-1)

Front: Front door

Rear: Rear parcel

The figure below shows the relationship

between the center frequency, gain and Q

curve.

SEDAN-2

(sedan-2)

Front: Front door

Rear: Rear door

MINI VAN-1

(mini van-1)

Front: Front door

Rear: Luggage (side)

Level

(dB)

Q curve(Q)

Q =

MINI VAN-2

(mini van-2)

Front: Front door

Rear: Rear door

3dB

WAGON

(wagon)

Front: Front door

Rear: Luggage (side)

Gain

USER (user)

User preference

3-3. Press the [OPTION] button.

Frequency

curve

Frequency

(Hz)

3-4. Press the [MENU] button and select from:

“BAND1” ➜ “BAND2” ➜ “BAND3” ➜

“BAND1”...

Center

Frequency (F)

3-5. Push the [SEEK PANEL] leftward or

● Q curve

rightward and select from:

The Q curve becomes sharper when the

numerical value is increased, and smoother

when the numerical value is decreased.

(Front speaker)

• FRONT

(Frequency) (20 Hz to 20 kHz)

• FREQUENCY

Flat frequency characteristics can be made by

selecting a Q curve opposite to that of the curve

to be compensated.

• GAIN (Gain) (–12 dB to +12 dB)

• Q

(Q curve) (1, 3, 5, 7, 20)

(Rear speaker)

• REAR

(20 Hz to 20 kHz)

• FREQUENCY

(–12 dB to +12 dB)

• GAIN

Q curve : 1

Q curve : 20

(1, 3, 5, 7, 20)

• Q

• FRONT

DXZ778RUSB

Basic Operations

P.EQ basic menu setting values

F: Center frequency, Q: Q curve, G: Gain (output level)

Parametric Equalizer Parameters (default)

No. (car type)

Channel

Band 1

Band 2

Band 3

1 (SEDAN-1) Front

Rear

250 Hz

–8 dB

–10 dB

+3 dB

–4 dB

–6 dB

–4 dB

–8 dB

0 dB

2 kHz

–4 dB

0 dB

5 kHz

8 kHz

–4 dB

0 dB

–5 dB

0 dB

+3 dB

0 dB

+3 dB

0 dB

–6 dB

0 dB

1.25 kHz

800 Hz

125 Hz

1.25 kHz

630 Hz

1.25 kHz

500 Hz

1 kHz

2 (SEDAN-2) Front

Rear

250 Hz

80 Hz

–4 dB

–12 dB

–4 dB

–8 dB

–5 dB

–8 dB

0 dB

8 kHz

1.25 kHz

2 kHz

Front

Rear

Front

Rear

Front

Rear

Front

Rear

125 Hz

250 Hz

500 Hz

(MINI VAN-1)

8 kHz

80 Hz

(MINI VAN-2)

8 kHz

5 (WAGON)

10 kHz

8 kHz

800 Hz

1 kHz

6 (USER)

5 kHz

0 dB

1 kHz

0 dB

5 kHz

3-6. Push the [P.CH] button upward or

2WAY mode

downward to adjust the frequency, the gain

and the Q.

• LEFT

(Front speaker (left))

3-7. Press and hold the [

] button for 2

• FREQUENCY

• RIGHT

(Front speaker (right))

• FREQUENCY

(Frequency)

seconds or longer to store the adjusting in

USER memory and auto return to the

USER mode.

• GAIN

(Gain)

• Q

• GAIN

When speaker system is “3WAY” or

“2WAY”:

(Q curve)

• Q

3-2. Press the [MENU] button and select from:

• LEFT

“BAND1” ➜ “BAND2” ➜ “BAND3” ➜

3-4. Push the [P.CH] button upward or

downward to adjust the frequency, the gain

and the Q.

“BAND1”...

3-3. Push the [SEEK PANEL] leftward or

rightward and select from:

Items

Adjustable

range

Initial value

3WAY mode

• LEFT

FREQUENCY 20 Hz to 20 kHz 500 Hz

(Frequency)

(Front speaker (left))

• FREQUENCY

• RIGHT

(Front speaker (right))

• FREQUENCY

(Frequency)

GAIN (Gain)

–12 dB to +12 0 dB

• GAIN

(Gain)

Q (Q curve)

1, 3, 5, 7, 20

• Q

• GAIN

(Q curve)

3-5. Press the [

] button to return to the

• Q

previous mode.

• LEFT

Note:

• Press and hold the [

] button for 2

seconds or longer to copy the settings between

left and right (for 3WAY or 2WAY speaker

system).

DXZ778RUSB

Basic Operations

● Adjusting the bass

2-1. Select “BASS”.

3-1. Press the [

● Adjusting the balance

2-1. Select “BALANCE”.

] button.

3-1. Push the [P.CH] button upward to

emphasize the sound from the right

speaker, push the button downward to

emphasize the sound from the left speaker.

3-2. Push the [P.CH] button upward or

downward to adjust the gain from –6 to +6

(The factory default setting is “0”).

∗ The factory default setting is “0”.

3-3. Press the [

previous mode.

] button to return to the

(Adjustment range: L12 to R12)

● Adjusting the fader

“FADER” can be adjusted only when the

speaker system is set to “2WAY” or “NORMAL”.

● Adjusting the treble

2-1. Select “TREBLE”.

3-1. Press the [

] button.

2-1. Select “FADER”.

3-2. Push the [P.CH] button upward or

downward to adjust the gain from –6 to +6

(The factory default setting is “0”).

3-1. Push the [P.CH] button upward to

emphasize the sound from the front

speaker, push the button downward to

emphasize the sound from the rear

speaker.

3-3. Press the [

previous mode.

] button to return to the

● Adjusting the sound restorer

The sound restorer enriches the playback of all

types of music files that have undergone any

level of data compression.

∗ The factory default setting is “0”.

(Adjustment range: R12 to F12)

● Setting high pass filter

“HPF” can be adjusted only when the speaker

system is set to “NORMAL”.

2-1. Select “S RESTORER”.

3-1. Push the [P.CH] button upward or

∗ The factory default setting is “THRGH” (through).

2-1. Select “HPF”.

downward to adjust.

Each time you push the [P.CH] button, the

sound restorer changes in the following

order:

3-1. Push the [P.CH] button upward or

downward to select the setting. Each time

you push the [P.CH] button, the setting

changes in the following order:

“OFF” ↔ “1” ↔ “2” ↔ “3”

∗ The factory default setting is “OFF”.

“THRGH” ↔ “50Hz” ↔ “80Hz” ↔ “125Hz”

Set this adjustment in accordance with the

music source used.

● Setting low pass filter

“S-W LPF” can be adjusted only when the

speaker system is set to “NORMAL”.

∗ The factory default setting is “THRGH” (through).

∗ If subwoofer function is set to “ST” or “MONO”,

“S-W LPF” can be selected.

OFF: For music sources compressed at

high bit rate

1: For music sources compressed for high

quality at low bit rate

2: For music sources compressed for

2-1. Select “S-W LPF”.

standard quality at low bit rate

3-1. Push the [P.CH] button upward or

3: For music sources compressed for low

downward to select the setting.

quality at low bit rate

Each time you push the [P.CH] button, the

setting changes in the following order:

“THRGH” ↔ “50Hz” ↔ “80Hz” ↔ “125Hz”

DXZ778RUSB

Basic Operations

3-3. Push the [P.CH] button upward or

Adjusting Sound Setting

Mode

downward to adjust the load and the save.

LOAD : “SELECTING 1” to “SELECTING

3” (The factory default setting is

“SELECTING 1”)

To change sound setting mode

SAVE : “1” to “3” (The factory default

setting is “1”)

1. Press and hold the [ ] button for 2

3-4. Press and hold the [

store into memory.

] button to

seconds or longer and select the sound

setting mode to adjust.

(LOAD: Press and hold the button for 1

second or longer.

2. Push the [SEEK PANEL] leftward or

rightward to select the “item name”.

SAVE: Press and hold the button for 2

seconds or longer.)

When speaker system is “NORMAL”:

“PRESET” ↔ “ALL SEAT” ↔ “T

ALIGNMENT” ↔ “P.EQ ON/OFF” ↔ “EQ

SELECT” ↔ “SUB WOOFER” ↔

“PRESET”...

● Setting the all seat

The setting of “T ALIGNMENT” and “SPEAKER

GAIN” temporarily returns to the factory default

setting. When the setting that is adjusted for the

driver's seat returns to the factory default

setting, a sound suitable for all seats is

provided.

When speaker system is “3WAY”:

“PRESET” ↔ “ALL SEAT” ↔ “X-OVER”

↔ “T ALIGNMENT” ↔ “SPEAKER GAIN”

↔ “P.EQ ON/OFF” ↔ “EQ SELECT” ↔

“SUB WOOFER” ↔ “PRESET”...

∗ The factory default setting is “OFF”.

2-1. Select “ALL SEAT”.

When speaker system is “2WAY”:

3-1. Push the [P.CH] button upward or

“PRESET” ↔ “ALL SEAT” ↔ “X-OVER”

↔ “T ALIGNMENT” ↔ “SPEAKER GAIN”

↔ “P.EQ ON/OFF” ↔ “EQ SELECT” ↔

“PRESET”...

∗ In the case of item names appearing with

the “ENT” suffix, after the item name, the

downward to select “ON” or “OFF”.

● Setting the X-OVER

This function allows you to adjust the speaker

setting such as cutoff frequencies or slope

matched to the speakers you are using.

(Crossover).

[

] button must be pressed to display

the setting value.

2-1. Select “X-OVER”.

∗ After completing settings, press the [

button to return to the previous mode.

]

3-1. Press the [

] button.

3-2. Push the [SEEK PANEL] leftward or

rightward and select from:

● Setting the preset setting

This function allows you to recall, save or

initialize the sound settings.

3WAY mode

• HIGH

(Front speaker (high))

If your speaker system is “3WAY” or “2WAY”,

you can store and recall up to three adjustments

you have made to “P.EQ ON/OFF”, “X-OVER”,

“T ALIGNMENT”, “SPEAKER GAIN”.

• HPF

(High pass filter)

• PHASE

• SUB-W

• HPF SLOPE

(Subwoofer)

• LPF

(HPF slope)

LOAD: To recall the stored sound settings.

SAVE: To save the sound settings.

INITIAL: To initialize the sound settings.

• PHASE

(Phase)

• LPF SLOPE

• HPF

• MID

(Front speaker (mid))

• LPF

The load and the save can be adjusted as

follows.

• HPF SLOPE

• PHASE

(Low pass filter)

• LPF SLOPE

2-1. Select “PRESET”.

(LPF slope)

• HIGH

3-1. Press the [

] button.

• HPF

3-2. Push the [SEEK PANEL] leftward or

• HPF SLOPE

rightward and select from:

“LOAD” ↔ “SAVE” ↔ “INITIAL” ↔

“LOAD”...

DXZ778RUSB

Basic Operations

● SUB-W (3WAY)/REAR (2WAY)

2WAY mode

Items

Adjustable

range

Initial value

• HIGH

(Front speaker (high))

• HPF

(High pass filter)

• PHASE

LPF

25 Hz to 10

kHz, THRGH

(through)

80 Hz

• REAR

(Rear speaker)

• LPF

• HPF SLOPE

(HPF slope)

LPF SLOPE

HPF

–6 dB, –12 dB, –12 dB

–18 dB

• PHASE

(Phase)

• LPF SLOPE

• HPF

• MID

(Front speaker (mid))

THRGH

(through), 16

Hz to 250 Hz

THRGH

(through)

• LPF

• HPF SLOPE

• PHASE

(Low pass filter)

HPF SLOPE

PHASE

–6 dB, –12 dB, –12 dB

–18 dB

• LPF SLOPE

(LPF slope)

• HIGH

• HPF

NOR (normal), NOR (normal)

REV (reverse)

• HPF SLOPE

3-4. Press the [

memory.

] button to store into

3-3. Push the [P.CH] button upward or

downward to adjust the “HPF”, “HPF

SLOPE”, “PHASE”, “LPF” and “LPF

SLOPE”.

● Setting the time alignment

The distance from the listener up to each

speaker can be entered in 2.3 cm steps, and the

time that the sound reaches the listener from

each speaker can be adjusted (Time alignment).

● HIGH

Items

Adjustable

range

Initial value

2-1. Select “T ALIGNMENT”.

HPF

THRGH

(through), 25

Hz to 20 kHz

2 kHz

3-1. Press the [

] button.

3-2. Push the [SEEK PANEL] leftward or

rightward and select from:

HPF SLOPE

PHASE

–6 dB, –12 dB, –12 dB

–18 dB

3WAY mode

• HIGH

(Front speaker (high))

NOR (normal), NOR (normal)

REV (reverse)

• HIGH L SP

• SUB-W

(Subwoofer)

(Left)

● MID

• SUB-W L SP

• HIGH R SP

Items

Adjustable

range

Initial value

(Left)

(Right)

• SUB-W R SP

• MID

(Right)

(Front speaker (mid))

LPF

630 Hz to 10

kHz, THRGH

(through)

2 kHz

• MID L SP

• HIGH

(Left)

• MID R SP

LPF SLOPE

HPF

–6 dB, –12 dB, –12 dB

–18 dB

(Right)

THRGH

(through), 25

Hz to 10 kHz

(through)

HPF SLOPE

PHASE

–6 dB, –12 dB, –12 dB

–18 dB

NOR (normal), NOR (normal)

REV (reverse)

DXZ778RUSB

Basic Operations

● Setting the speaker gain

2WAY mode

This function allows you to adjust the speaker

output level. Adjust so that the volumes that are

output from each speaker are well-balanced

(Speaker gain).

• HIGH

(Front speaker (high))

• HIGH L SP

• REAR

(Rear speaker)

(Left)

• REAR L SP

• HIGH R SP

2-1. Select “SPEAKER GAIN”.

(Right)

(Left)

3-1. Press the [

] button.

• REAE R SP

• MID

(Front speaker (mid))

(Right)

3-2. Push the [SEEK PANEL] leftward or

• MID L SP

• HIGH

rightward and select from:

(Left)

• MID R SP

3WAY mode

(Right)

• HIGH

(Front speaker (high))

NORMAL mode

• FRONT

(Front speaker)

• HIGH L SP

• MID R SP

(Left)

• SUB-W

(Subwoofer)

• SUB-W L SP

• HIGH R SP

(Right)

• FRONT L SP

• SUB-W

(Left)

(Subwoofer)

• MID

• SUB-W L SP

(Front speaker (mid))

• FRONT R SP

• SUB-W R SP

(Left)

(Right)

• MID L SP

• SUB-W R SP

• REAR

• HIGH

(Rear speaker)

(Right)

• REAR L SP

• FRONT

2WAY mode

(Left)

• HIGH

• REAR R SP

(Front speaker (high))

(Right)

• HIGH L SP

• MID R SP

(Left)

(Right)

• REAR

3-3. Push the [P.CH] button upward or

downward to adjust “HIGH L SP”, “HIGH R

SP”, “MID L SP”, “MID R SP”, “SUB-W L

SP”, “SUB-W R SP”, “REAR L SP”, “REAR

R SP”, “FRONT L SP” and “FRONT R SP”.

• HIGH R SP

(Rear speaker)

(Right)

• REAR L SP

• MID

(Front speaker (mid))

(Left)

• REAR R SP

• MID L SP

(Right)

(Left)

• HIGH

Above 12 adjustment item's adjustable

range: 0 to 501.4 cm (The factory default

setting is “0”)

3-3. Push the [P.CH] button upward or

downward to adjust the “HIGH L SP”,

“HIGH R SP”, “MID L SP”, “MID R SP”,

“SUB-W L SP”, “SUB-W R SP”, “REAR L

SP” and “REAR R SP”.

3-4. Press the [

previous mode.

] button to return to the

Above 10 adjustment item's adjustable

range: –20 dB to 0 (The factory default

setting is “0”)

3-4. Press the [

previous mode.

] button to return to the

DXZ778RUSB

Basic Operations

● Setting the P.EQ ON/OFF

∗ The factory default setting is “OFF”.

2-1. Select “P.EQ ON/OFF”.

3-1. Push the [P.CH] button upward or

downward to select “ON” or “OFF”.

● Setting the EQ SELECT

∗ The factory default setting is “P.EQ”.

2-1. Select “EQ SELECT”.

3-1. Push the [P.CH] button upward or

downward to select “P.EQ” or “B/T” (Bass/

Treble).

● Setting the Subwoofer

∗ The factory default setting is “OFF”.

2-1. Select “SUB WOOFER”.

3-1. Push the [P.CH] button upward or

downward to select “ST”, “MONO” or

“OFF”.

CT (Clock Time) function

The CT function receives CT data sent from an

RDS station and displays the time.

∗ If a CT data is not being received, “– –:– –CT”

appears in the display.

Note:

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

DXZ778RUSB

Radio Operations

● LOCAL SEEK

Listening to the radio

If the [SEEK PANEL] is pushed leftward or

rightward and held in position for 1 second or

longer, local seek tuning will be enabled.

Broadcast stations with good reception

sensitivity are selected.

1. Press the [SRC] button and select the radio

mode. The frequency or PS and PTY

appears in the display.

∗ PS: Programme service name

∗ PTY: Programme type

2. Press the [MENU] button and select the

radio band. Each time the button is pressed,

the radio reception band changes in the

following order:

∗ When local seeking starts, “LO SEEK” appears in

the display.

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜

FM1...

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

3. Push the [SEEK PANEL] leftward or

rightward to tune in the desired station.

Tuning

1. Press the [MENU] button and select the

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

desired band (FM or AM (MW/LW)).

∗ If “MANU” is not lit in the display, press and

hold the [MENU] button for 1 second or

longer. “MANU” is lit in the display and manual

tuning is now available.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

2. Tune into a station.

● Quick tuning

DX SEEK can automatically tune in to

receivable broadcast stations; LOCAL SEEK

can tune in to only broadcast stations with a

good reception sensitivity.

Push the [SEEK PANEL] leftward or rightward

and hold in position for 1 second or longer to

tune in a station.

● Step tuning

1. Press the [MENU] button and select the

Push the [SEEK PANEL] leftward or rightward

to manually tune in a station.

desired band (FM or AM (MW/LW)).

2. Tune into a station.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

∗ If “MANU” is lit in the display, press and hold

the [MENU] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

∗ If “TA” is lit in the display, TP stations are

Recalling a preset station

automatically sought.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Pushing the [P.CH] button

upward or downward recalls the stored radio

frequency automatically.

● DX SEEK

Push the [SEEK PANEL] leftward or rightward

to automatically seek a station.

When the [SEEK PANEL] is pushed rightward,

the station is sought in the direction of higher

frequencies; if the [SEEK PANEL] is pushed

leftward, the station is sought in the direction of

lower frequencies.

1. Press the [MENU] button and select the

desired band (FM or AM (MW/LW)).

2. Push the [P.CH] button upward or downward

to recall the stored station.

∗ When seek tuning starts, “DX SEEK” appears in

the display.

DXZ778RUSB

Radio Operations

Manual memory

Preset scan

1. Select the desired station with seek tuning or

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

manual tuning.

2. Press the [

] button to enter the

preset memory mode. Push the [P.CH]

button upward or downward to select a

desired station, then press and hold the

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “PRESET SCAN”.

[

] button for 2 seconds or longer to

3. Press the [

∗ When a desired station is tuned in, press the

] button again to continue receiving

that station.

] button.

store the current station into preset memory.

[

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

1. Press the [MENU] button and select the

desired band (FM or AM (MW/LW)).

2. Press the [OPTION] button.

3. Push the [SEEK PANEL] leftward or

rightward to select “AUTO STORE”.

4. Press and hold the [

] button for 2

seconds or longer. The stations with good

reception are stored automatically to the

preset channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

DXZ778RUSB

RDS Operations

RDS (Radio Data System)

AF function

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS

data.

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

∗ The factory default setting is “ON”.

1. Press the [OPTION] button.

This system can display the name of the

broadcast station being received (PS) and can

automatically switch to the broadcast station

with the best reception as you move long

distances (AF switching).

2. Push the [SEEK PANEL] leftward or

rightward to select “AF”.

3. Push the [P.CH] button upward or downward

Also, if a traffic announcement or programme

type is broadcast from an RDS station, no

matter what mode you are in, this broadcast is

received.

to select “ON” or “OFF”.

• ON:

“AF” in the display lights and AF function

turns on.

Additionally, if EON information is received, this

information enables automatic switching of

other preset stations on the same network and

interruption of the station being received with

traffic information from other stations (TP). This

function is not available in some areas.

• OFF:

“AF” in the display goes off and AF function

turns off.

4. Press the [OPTION] button to return to the

previous mode.

∗ If the reception of the current broadcast

station deteriorates, “PI SEARCH” appears in

the display and the radio searches for the

same programme on another frequency.

When using the RDS function, always set the

radio to FM mode.

• AF

• PS

: Alternative Frequency

: Programme Service Name

• PTY : Programme Type

• EON : Enhanced Other Network

• TP

: Traffic Programme

∗ RDS interrupt does not function during AM radio

reception.

∗ When set receives RDS signal, and can read PS

data, PS appears in the display.

DXZ778RUSB

RDS Operations

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for that

region is received.

∗ The factory default setting is “OFF”.

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

● Setting the TA standby mode

If you press the [TA] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into the TA standby mode

until a traffic announcement is broadcast. When

a traffic announcement broadcast starts, “TRA

INFO” appears in the display. If you press the

[TA] button while a traffic announcement

broadcast is being received, the traffic

announcement broadcast reception is cancelled

and the unit goes into the TA standby mode.

1. Press the [OPTION] button.

● Cancelling the TA standby mode

As “TP” and “TA” lit in the display, press the [TA]

button. The “TA” in the display goes off and the

TA standby mode is cancelled.

∗ If “TP” is not lit, pressing the [TA] button searches

for a TP station.

2. Push the [SEEK PANEL] leftward or

rightward to select “REG”.

3. Push the [P.CH] button upward or downward

to select “ON” or “OFF”.

• ON:

“REG” in the display lights and REG function

turns on.

● Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit

automatically receives a TP station.

• OFF:

“REG” in the display goes off and REG

function turns off.

Note:

4. Press the [OPTION] button to return to the

• If a TP station is not received, the unit continues

the search operation. Pressing [TA] button again

goes off “TA” in the display and stops TP station

searching.

previous mode.

Manually tuning a regional station

in the same network

Auto store function for TP stations

1. This function is valid when the AF function is

You can automatically store up to 6 TP stations

into preset memory. If the number of TP can be

received less than 6, broadcast stations already

stored in memory and left without being

overwritten.

ON and the REG function is OFF.

Note:

• This function can be used when a regional

broadcast of the same network is received.

2. Push the [P.CH] button upward or downward

As “TA” lit in the display:

to call out the regional station.

1. Press the [OPTION] button.

3. If the reception condition of the called out

station is bad, push the [P.CH] button

upward or downward to select the same

preset memory station. The unit receives a

local station on the same network.

2. Push the [SEEK PANEL] leftward or

rightward to select “AUTO STORE”.

3. Press and hold the [

seconds or longer.

] button for 2

The TP stations with the good reception

sensitivity are stored into preset memory.

∗ Even if you select FM1 or FM2, a TP station is

stored into memory for FM3.

TA (Traffic Announcement)

In the TA standby mode, when a traffic

announcement broadcast starts, the traffic

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Traffic programme (TP)

automatic tuning is also possible.

DXZ778RUSB

RDS Operations

PTY

PTY selecting

This function enables you to listen to a

1. Press the [OPTION] button.

broadcast of the selected programme type even

if the unit is on a function mode other than radio.

2. Push the [SEEK PANEL] leftward or

rightward to select “PTY SELECT”.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

∗ The factory default setting is “OFF”.

1. Press the [OPTION] button.

3. Press the [

] button.

4. Push the [P.CH] button upward or downward

to select the desired PTY.

The 29 types of PTY below can be selected.

PTY item

2. Push the [SEEK PANEL] leftward or

rightward to select “PTY”.

ENGLISHe

Newsa

ContentsA

News

3. Push the [P.CH] button upward or downward

to select “ON” or “OFF”.

Affairsa

Infoa

Today’s events

Information

Sports

• ON:

“PTY” in the display lights and PTY standby

mode is turned on. When the selected PTY

broadcast starts, the PTY item name

appears in the display.

Sporta

Educatea

Dramaa

Culturea

Sciencea

Varieda

Education

Drama

• OFF:

Culture

“PTY” in the display goes off and PTY

standby mode is cancelled.

Science

Variety

4. Press the [OPTION] button to return to the

previous mode.

Pop Ma

Pop music

Rock music

Easy music

Light music

Classics

● Cancelling a PTY interrupt broadcast

Press the [TA] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

Rock Ma

Easy Ma

Light Ma

Classicsa

Other Ma

Weathera

Financea

Childrena

Sociala

PTY seek

1. Press the [OPTION] button.

Other music

Weather

Finance

2. Push the [SEEK PANEL] leftward or

rightward to select “PTY SELECT”.

For children

Social

3. Press the [

] button.

4. Push the [SEEK PANEL] rightward to search

for a PTY broadcast in the direction of higher

frequencies; push the [SEEK PANEL]

leftward to search in the direction of lower

frequencies.

Religiona

Phone Ina

Travela

Religion

Phone in

Travel

Leisurea

Jazza

Leisure

∗ If no station with the selected PTY broadcast

can be received, the unit returns to the PTY

select mode.

Jazz

Countrya

Nation Ma

Oldiesa

Country

Nation music

Oldies

Folk Ma

Documenta

Folk music

Documentaries

DXZ778RUSB

RDS Operations

Emergency broadcast

Volume setting of TA, emergency

broadcast (Alarm) and PTY

The volume for TA, Alarm and PTY interrupts

can be set during TA, Alarm or PTY interrupt.

If an emergency broadcast is received, all the

function mode operations are stopped.

“ALARM!” appears in the display and the

emergency broadcast can be heard.

∗ The factory default setting is “15”.

● Cancelling an emergency broadcast

If you press the [TA] button, emergency

broadcast reception is cancelled.

During a TA, Alarm or PTY interrupt, push the

[VOL] button upward or downward to set the

volume to the desired level (0 to 33).

∗ When the TA, Alarm or PTY interrupt ends, the

volume returns to the level it had before the

interrupt.

Switching the PTY display language

You can select one of 4 languages (English,

German, Swedish or French) for the PTY

displayed in the display.

∗ The factory default setting is “ENGLISH”.

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “LANGUAGE”.

3. Press the [

] button.

4. Push the [P.CH] button upward or downward

to select the desired language.

5. Press the [OPTION] button to return to the

previous mode.

DXZ778RUSB

CD/MP3/WMA/AAC Operations

• Tracks purchased at an iTunes Music store,

and copyright-protected files cannot be

played.

MP3/WMA/AAC

What is MP3?

• When playing AAC files that include image

data, additional time may be required before

playback begins.

MP3 is an audio compression method and

classified into audio layer 3 of MPEG standards.

This audio compression method has penetrated

into PC users and become a standard format.

• Files may not play properly, depending on the

iTunes version under which an AAC file is

encoded.

This MP3 features the original audio data

compression to about 10 percent of its initial

size with a high sound quality. This means that

about 10 music CDs can be recorded on a CD-

R disc or CD-RW disc to allow a long listening

time without having to change CDs.

Precautions when creating MP3/

WMA/AAC disc

● Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz–48 kHz,

Bit rate 8 kbps–320 kbps / VBR

2. WMA: Bit rate 32 kbps–192 kbps

3. AAC: Sampling rate 8 kHz–48 kHz,

Bit rate 8 kbps–320 kbps / VBR

What is WMA?

WMA is the abbreviation of Windows Media

Audio, an audio file format developed by

Microsoft Corporation.

Notes:

● File extensions

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio

is output (The WMA indicator blinks).

• Windows Media™, and the Windows ® logo are

trademarks, or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

1. Always add a file extension “.MP3” (.mp3),

“.WMA” (.wma) or “.M4A” (.m4a) to MP3,

WMA or AAC file by using single byte letters.

If you add a file extension other than

specified or forget to add the file extension,

the file cannot be played.

● To disable DRM (Digital Rights

Management)

2. Files without MP3/WMA/AAC data will not

play. The indication “– –:– –” appears in the

play time display if you attempt to play files

without MP3/WMA/AAC data.

1. When using Windows Media Player 8, click

on TOOLS ➜ OPTIONS ➜ COPY MUSIC

tab, then under COPY SETTINGS, unclick

the check box for PROTECT CONTENT.

Then, reconstruct files.

● Logical format (File system)

1. When writing MP3/WMA/AAC file on a CD-R

disc or CD-RW disc, please select “ISO9660

level 1, 2 or JOLIET or Romeo or APPLE

ISO” as the writing software format. Normal

play may not be possible if the disc is

recorded on another format.

2. When using Windows Media Player 9, click

on TOOL ➜ OPTIONS ➜ MUSIC RECORD

tab, then under Recording settings, unclick

the Check box for RECORD PROTECTED

MUSIC. Then, reconstruct files.

2. The folder name and file name can be

displayed as the title during MP3/WMA/AAC

play but the title must be within 64 single

byte alphabetical letters and numerals

(including an extension).

Personally constructed WMA files are used

at your own responsibility.

What is AAC?

• AAC is an acronym for “Advanced Audio

Coding” and refers to the audio compression

method used with video compression

standards MPEG-2 and MPEG-4.

3. Do not affix a name to a file inside a folder

having the same name.

● Folder structure

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

• AAC files composed with the following

conditions can be played:

- AAC files encoded with iTunes.

- iTunes Ver. 7.0 or earlier.

- File extension “.m4a” (“.M4A”)

DXZ778RUSB

CD/MP3/WMA/AAC Operations

● Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 510 files can be played.

1. Press the [Q] button.

The control panel opens.

2. Press the [Q] button.

The disc is ejected.

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

Note:

• Always close the SLOPING CONSOLE after

opening it or ejecting the CD.

3. Some noise may occur depending on the

type of encoder software used while

recording.

CAUTION

• Be careful not to catch your hand or

fingers while closing the SLOPING

CONSOLE.

Set the type of file to be played

(multi-session function)

When a single disc holds both normal CD type

tracks and MP3/WMA/AAC type tracks, use this

command to select which type of track to play.

• Do not try to put your hand or fingers in

the disc insertion slot. Also never insert

foreign objects into the slot.

• Do not insert discs where adhesive comes

out from cellophane tape or a rental CD

label, or discs with marks where

cellophane tape or rental CD labels were

removed. It may be impossible to extract

these discs from the unit and they may

cause the unit to break down.

∗ Default setting is “CD”.

• When only one type of track (either music CD

or MP3/WMA/AAC) is recorded on a disc,

selecting either type will allow playback of the

disc.

• When playing CCCD (copy-control CDs), set

to CD type.

Listening to a disc already loaded

in the unit

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “MULTI SESS”.

Press the [SRC] button to select the CD/MP3/

WMA/AAC mode.

3. Push the [P.CH] button upward or downward

to select “CD” or “MP3”. The mixed mode is

switched between CD type or MP3/WMA/

AAC type.

When the unit enters the CD/MP3/WMA/AAC

mode, play starts automatically.

If there is no disc loaded, the indication “NO

• CD

DISC” appears in the title display.

When playing music CD only.

• MP3

When playing music MP3/WMA/AAC only.

Loading a CD

1. Press the [Q] button. The SLOPING

4. When setting is completed, remove the disc

and reinsert it.

CONSOLE opens.

2. Insert a CD into the center of the CD SLOT

with the labeled side facing up. The CD plays

automatically after loading.

Backup Eject function

You can eject a disc by pressing the [Q] button

even if the engine key or ACC is at the OFF

position.

Notes:

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

CAUTION

• Discs not bearing the

mark and

When the disc is ejected, press the [Q]

button to close the control panel. If the

control panel is left open, you will hear a

double beep, and the control panel

automatically closes.

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

DXZ778RUSB

CD/MP3/WMA/AAC Operations

Pausing play

Selecting a track

1. Press the [

] button to pause play.

● Track-up

1. Push the [SEEK PANEL] rightward to move

ahead to the beginning of the next track.

“PAUSE” appears in the display.

2. To resume CD play, press the [

button again.

]

2. Each time you push the [SEEK PANEL]

rightward, the track advances ahead to the

beginning of the next track.

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA/AAC disc and user titles input with this

unit.

● Track-down

1. Push the [SEEK PANEL] leftward to move

back to the beginning of the current track.

2. Push the [SEEK PANEL] leftward twice to

move back to the beginning of the previous

track.

1. Each time you press the [TITLE] button, the

title display changes in the following order:

● CD-TEXT disc

Title scan ➜ User title (disc) ➜ CD-text title

(track) ➜ CD-text title (disc) ➜ Artist name ➜

Title scan ...

Fast-forward/fast-backward

● Fast-forward

1. Push the [SEEK PANEL] rightward and hold

in position for 1 second or longer.

● MP3/WMA/AAC disc

Title scan ➜ Track ➜ Folder ➜ Title TAG ➜

Album TAG ➜ Artist TAG ➜ Title scan ...

● Fast-backward

1. Push the [SEEK PANEL] leftward and hold

in position for 1 second or longer.

● TITLE SCAN

When the display is changed to the title scan

mode, all titles of the track scroll automatically.

∗ For MP3/WMA/AAC discs, it takes some time

until the start of searching and between

tracks. In addition, the playing time may have

a margin of error.

When “AUTO SCROLL” is set “ON”, the titles

scan automatically. When “AUTO SCROLL” is

set “OFF”, the titles only scan one time. (The

factory default setting is “ON”. Refer to the

subsection “Setting the method for title scroll”

in section “Operations Common to Each

Mode”.)

Folder Select

This function allows you to select a folder

containing MP3/WMA/AAC files and start

playing from the first track in the folder.

Notes:

1. Push the [P.CH] button upward or

• If the CD playing is not a CD-text CD or no user

title has been input, “ uNO TITLE” appears in

the display.

• If MP3/WMA/AAC disc is not input TAG, “NO

TITLE” appears in the display.

• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2.

downward.

Push the [P.CH] button upward to move the

next folder. Push the [P.CH] button

downward to move the previous folder.

∗ Folder without an MP3/WMA/AAC file is not

selectable.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

2. To select a track, push the [SEEK PANEL]

leftward or rightward.

• Only ASCII characters can be displayed in Tags.

Top function

The top function resets the CD player to the first

track of the disc. Press and hold the [MENU]

button for 1 second or longer to play the first

track (track No. 1) on the disc.

∗ In case of MP3/WMA/AAC, the first track of a

folder being played will be returned.

DXZ778RUSB

CD/MP3/WMA/AAC Operations

List search function

1. Press the [MENU] button to enter the list

search mode. And then the track list appears

in the display.

● Repeat play

This function allows you to play the current track

repeatedly.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

2. Push the [P.CH] button upward or downward

to select a track.

3. Push the [P.CH] button upward or downward

to select “ ”, and then press the [

button to perform repeat play.

∗ “TRACK RPT” appears in the display.

]

∗ If you push the [SEEK PANEL] leftward or

rightward, the track list scrolls 5 lines at a

time.

3. Press the [

] button to play.

● Folder repeat play

∗ In case of MP3/WMA/AAC, this function is

performed in the current folder.

Note:

This function allows you to play a track currently

being played in the MP3/WMA/AAC folder

repeatedly.

• If no operation is performed for more than 10

seconds, this mode can be cancel and return to

the usual mode.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

Other various play functions

1. Press the [OPTION] button.

[

] button to perform folder repeat

play. “FOLDER RPT” appears in the display.

● Random play

This function allows you to play all tracks

recorded on a disc in a random order.

2. Push the [SEEK PANEL] leftward or

● Scan play

rightward to select “RDM”.

This function allows you to locate and play the

first 10 seconds of all the tracks recorded on a

disc.

3. Push the [P.CH] button upward or downward

to select “ ”, and then press the [

button to perform random play.

]

2. Push the [SEEK PANEL] leftward or

“TRACK RDM” appears in the display.

rightward to select “SCN”.

● Folder random play

3. Push the [P.CH] button upward or downward

This function allows you to play all the tracks of

all the folders recorded on an MP3/WMA/AAC

disc in a random order.

to select “ ”, and then press the [

button to perform scan play.

]

“TRACK SCN” appears in the display.

∗ Scan play starts from the next track after the

track currently being played.

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

3. Push the [P.CH] button upward or downward

● Folder scan play

This function allows you to locate and play the

first 10 seconds of the first track of all the folders

on an MP3/WMA/AAC disc.

to select “ALL”, and then press the

[

] button to perform folder random

play. “FOLDER RDM” appears in the

display.

2. Push the [SEEK PANEL] leftward or

● To cancel the trick play

2. Push the [SEEK PANEL] leftward or

rightward to select “SCN”.

3. Push the [P.CH] button upward or downward

rightward to select “TRICK OFF”.

to select “ALL”, and then press the

3. Press the [

trick play.

] button to cancel the

[

] button to perform folder scan

play.

“FOLDER SCN” appears in the display.

∗ Folder scan play starts from the next folder

after the folder currently being played.

DXZ778RUSB

Operations Common to Each Mode

• Setting COLOR SCAN mode

To change adjustment setting

As selecting “COLOR SCAN”, the color

automatically changes.

1. Press and hold the [OPTION] button for 1

second or longer to switch to the

adjustment selection display.

∗ The factory default setting is “COLOR SCAN”.

∗ After 3 seconds the color changes to the other.

• Setting USER mode

2. Push the [SEEK PANEL] leftward or

rightward to select the “item name”.

The factory default setting is “RED 8” (red),

“GREEN 8” (green), “BLUE 8” (blue).

“COLOR” ↔ “CONTRAST” ↔ “SCREEN

SAVER” ↔ “MSG INPUT” ↔ “AUTO

SCROLL” ↔ “SCROLL SPEED” ↔

“DIMMER” ↔ “BLINK LED” ↔ “AMP

CANCEL” ↔ “TEL SEL” ↔ “TEL-

SPEAKER” ↔ “TEL-SWITCH” ↔

“SYSTEM CHECK”

As selecting “USER COLOR 1, 2, 3”, press the

[OPTION] button to enter the setting.

1. Push the [SEEK PANEL] leftward or

rightward to select “RED”, “GREEN” or

“BLUE”.

2. Push the [P.CH] button upward or downward

3. Push the [P.CH] button upward or

downward to select the “desired setting

value”.

to select from 0 to 8.

3. Press and hold the [

] button for 2

seconds or longer to store the color in

memory and return to the previous mode.

∗ In the case of display appearing “ENT”, the

[

] button must be pressed to display

COLOR

RED

(red)

GREEN BLUE

(green) (blue)

the setting value.

∗ After completing settings, press the

[OPTION] button to return to the previous

mode.

Indigo Blue

Surf Blue

Silky White

● Setting the button illumination

2-1. Select “COLOR”.

Aqua Green

Fresh Green

Leaf Green

3-1. Press the [

] button.

3-2. Push the [SEEK PANEL] leftward or

rightward to select the color type in the

following orders:

Warm Amber

Passion Red

Vivid Pink

“COLOR SCAN” ↔ “Indigo Blue” ↔ “Surf

Blue” ↔ “Silky White” ↔ “Aqua Green” ↔

“Fresh Green” ↔ “Leaf Green” ↔ “Warm

Amber” ↔ “Passion Red” ↔ “Vivid Pink”

↔ “Pale Pink” ↔ “Dark Violet” ↔ “Pure

Purple” ↔ “USER COLOR 1” ↔ “USER

COLOR 2” ↔ “USER COLOR 3” ↔

“COLOR SCAN” ...

Pale Pink

Dark Violet

Pure Purple

USER COLOR 1

USER COLOR 2

USER COLOR 3

DXZ778RUSB

Operations Common to Each Mode

3-7. Press and hold the [

] button for 2

● Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “8”. (Adjustment

level: 1 to 16)

seconds or longer to store the message in

memory and cancel the input message

mode.

∗ Press and hold the [MENU] button for 1

second or longer to cancel the input

message. Then press and hold the

2-1. Select “CONTRAST”.

3-1. Push the [P.CH] button upward or

[

] button for 2 seconds or longer to

downward to adjust the contrast.

store the message and the message return

to the default setting.

● Turning the screen saver function on

● Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC

title.

∗ The factory default setting is “ON”.

2-1. Select “AUTO SCROLL”.

or off

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

3-1. Push the [P.CH] button upward or

downward to select “ON” or “OFF”.

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time.

∗ The factory default setting is “Pattern RANDOM”.

● Setting the speed of the title scroll

This function allows you to adjust the speed of

the title scroll.

2-1. Select “SCREEN SAVER”.

3-1. Press the [

] button.

3-2. Push the [P.CH] button upward or

∗ The factory default setting is “3”.

downward to select the setting.

2-1. Select “SCROLL SPEED”.

“Pattern RANDOM” ↔ “Pattern

MESSAGE” ↔ “Pattern SS” ↔ “Pattern

OFF”

3-1. Push the [P.CH] button upward or

downward to select from “1” to “6”.

● Setting the dimmer control

You can set the dimmer control “HIGH”, “MID”,

“LOW” or “OFF”.

● Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

∗ The factory default setting is “MID”.

∗ The factory default setting is “Welcome to

2-1. Select “DIMMER”.

Clarion”.

3-1. Push the [P.CH] button upward or

2-1. Select “MSG INPUT”.

downward to select the setting.

3-1. Press the [

] button.

“HIGH” ↔ “MID” ↔ “LOW” ↔ “OFF”

3-2. Press and hold the [MENU] button for 1

second or longer to clear the old message.

3-3. Push the [SEEK PANEL] leftward or

rightward to move the cursor.

3-4 Press the [MENU] button to select a

character type. Each time you press the

[MENU] button, the character type changes

in the following order:

Capital letters ➜ Small letters ➜ Numbers/

Symbols ➜ Umlaut ➜ Capital letters…

3-5. Push the [P.CH] button upward or

downward to select the desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

DXZ778RUSB

Operations Common to Each Mode

● Anti-theft indicator

● Cellular phone interrupt setting

If you connect this unit and your cellular phone

with a separately sold cable, you can listen to

your telephone calls on your car speakers.

The red Anti-theft indicator is a function for

preventing theft. When the DCP is removed

from the unit, this indicator blinks.

∗ The factory default setting is “OFF”.

2-1. Select “BLINK LED”.

2-1. Select “TEL-SWITCH”.

3-1. Push the [P.CH] button upward or

downward to select the setting in the

following order:

downward to select “ON” or “OFF”.

● Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “AMP CANCEL”.

“OFF” ↔ “ON” ↔ “MUTE”

• OFF:

This unit continues normal operation even

when the cellular phone is used.

3-1. Push the [P.CH] button upward or

downward to select “ON” or “OFF”.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

Use with connected AMP.

• OFF:

∗ When listening to your calls on your car

speakers, you can adjust the volume by

pushing the [P.CH] button upward or

downward.

Use with inside AMP.

● Set the cellular phone connection

mode (AUX/CeNET)

You can listen to your telephone calls from the

• MUTE:

speakers connected to this unit.

∗ The factory default setting is “AUX”.

The sound from this unit is muted during

telephone calls.

Note:

2-1. Select “TEL SEL”.

• If connecting a hands-free kit, please ensure the

setting is ON to receive the telephone audio

through the system.

3-1. Push the [P.CH] button upward or

downward to select “AUX” or “CENET”.

• AUX:

● Performing a system check

2-1. Select “SYSTEM CHECK”.

AUX input cable is for cellular phone audio

input. When the AUX input cable is used to

connect a AUX BLUETOOTH BB (BLT373)

(sold separately).

3-1. Press and hold the [

second or longer.

] button for 1

“SYSTEM CHECK” appears in the display,

then the unit returns to the speaker system

selecting mode.

• CENET:

CENET input cable is for cellular phone

audio input. When a CeNET cable is used

to connect a cellular phone (BLT433 or

TEL-002) (sold separately).

AUX function

● Setting the car speaker output for the

cellular phone

∗ The factory default setting is “R”.

This system has an external input cable so you

can listen to sounds and music from external

devices connected to this unit.

∗ To output the telephone calls, set the cellular

● Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

phone interrupt to ON.

2-1. Select “TEL-SPEAKER”.

3-1. Push the [P.CH] button upward or

downward to select “R” or “L”.

∗ The factory default setting is “MID”.

• R:

1. Press the [OPTION] button, “AUX SENSE

Telephone calls can be heard on the front

right speaker connected to this unit.

MID” appears in the display.

2. Push the [P.CH] button upward or downward

• L:

to select “LOW”, “MID” or “HIGH”.

Telephone calls can be heard on the front

left speaker connected to this unit.

DXZ778RUSB

Operations Common to Each Mode

Entering titles

Clearing titles

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be

entered for each mode are as follows.

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

2. Press the [OPTION] button.

Mode

Number of titles

50 titles

3. Push the [SEEK PANEL] leftward or

rightward to select “TITLE INPUT”.

CD mode

TV mode

4. Press the [

] button.

20 titles

The display switches to the title input display.

CD changer mode

Number of titles

5. Press and hold the [MENU] button for 1

DCZ628 connected

100 titles

second or longer.

All characters in the title disappear.

1. Press the [SRC] button to select the mode

you want to enter a title (CD, CD changer or

TV).

6. Press and hold the [

] button for 2

seconds or longer to store the setting.

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

3. Press the [OPTION] button.

4. Push the [SEEK PANEL] leftward or

rightward to select “TITLE INPUT”.

5. Press the [

] button.

The display switches to the title input display.

6. Push the [SEEK PANEL] leftward or

rightward to move the cursor.

7. Press the [MENU] button to select a

character type. Each time you press the

[MENU] button, the character type changes

in the following order:

Capital letters ➜ Small letters ➜ Numbers/

Symbols ➜ Umlaut ➜ Capital letters…

8. Push the [P.CH] button upward or downward

to select the desired character.

9. Repeat steps 6 to 8 to enter up to 10

characters for the title.

10.Press and hold the [

] button for 2

seconds or longer to store the title into

memory.

DXZ778RUSB

6. OPERATIONS OF ACCESSORIES

USB Operations

• To prevent the accidental loss of data, always

back up important data on your computer.

USB memory device operation

Note:

• This unit does not support connections to a

computer. In addition, connections made

through a USB hub device are also not

supported.

• The following operations are the same as for CD

mode:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Top function

∗Scan play

∗Repeat play

∗Random play

• When a USB memory device is composed of

two or more drives, only one of the drives will

be detected.

• USB memory devices with security functions

cannot be played.

• Do not connect an iPod to the USB

connector, since playback and controls may

not function properly. To connect an iPod,

use the CeNET iPod interface. For details,

see the section “iPod BB Operations” (page

37).

∗Folder selection

∗List search function

See “CD/MP3/WMA/AAC Operations” (page 27-

30) for details.

About USB memory

• USB is an acronym for Universal Serial Bus,

and refers to an external bus standard

supporting data transfer rates of 12 Mbps.

• The order in which tracks are recorded may

differ depending on the USB memory device

connected (the actual playback order may not

be the same as that indicated on your

computer’s display).

• This unit is compatible with USB 1.1/2.0 with

maximum data transfer rates of 12 Mbps.

CAUTION

• USB memory devices that can be played by

connecting to the unit’s USB cable are limited

to those recognized as “USB mass storage

class devices”; operation is not guaranteed

with all USB memory devices.

• Insert and remove a USB memory device

only when the device is not being

accessed. Connecting or disconnecting

the device at the following times may

result in the loss of data:

∗ Devices compatible with “USB Mass Storage

Class” can be used merely by connecting to

the host device, without need for special

drivers or application software.

- If the USB memory device is removed or

power is disconnected during writing to

the device.

• Consult the manufacturer of your USB

memory device for information regarding

whether it is supported by “USB Mass

Storage Class” standards.

- When the device is subjected to static

electricity or electric noise.

• Do not leave a USB memory device

unattended in an automobile. Exposure to

direct sunlight or high temperatures may

cause deformation or other malfunction of

the USB memory device.

• Audio files playable on this unit are limited to

MP3/WMA/AAC files. For details, see the

section “MP3/WMA/AAC” (page 27).

Copy-protected WMA/AAC files cannot be

played on this unit.

DXZ778RUSB

USB Operations

Connecting a USB memory device

To stop play

1. Connect the USB memory device to the USB

1. Press the [SRC] button and switch the

function to a source other than the USB

memory.

cable.

Playback will begin from the first file

recorded on the USB memory device.

∗ If the USB memory device is not recognized,

press the [SRC] button to switch the source to

the device.

∗ Always insert the USB memory device fully

into the connector. Incomplete connections

may cause the USB memory device not to be

recognized.

∗ Depending on the number of tracks recorded,

some amount of time may be required until all

tracks are read into the unit.

CAUTION

Do not remove the USB memory device

when the USB mode is selected, since it may

result in loss or damage to data on the USB

memory device.

Always backup and save important data on

your computer.

2. Remove the USB memory device from the

USB cable.

∗ The order in which tracks are recorded may

differ depending on the USB memory device

connected (the actual playback order may not

be the same as that indicated on your

computer’s display).

To listen to tracks on a connected

USB memory device

1. Press the [SRC] button to switch the source.

When USB memory device is selected,

playback will begin from the location at which

playback was previously stopped.

∗ When a USB memory device is connected the

USB mode will be displayed.

∗ When a USB memory device is disconnected

and then reconnected, playback will begin

from the beginning of the USB memory

device.

DXZ778RUSB

iPod BB Operations

● iPod BB

Other various play functions

(in Play mode)

This section describes operations when

connected to a CeNET iPod Interface (EA-

1276E). (Hereinafter, “iPod Interface (EA-

1276E)” is abbreviated as iPod BB.)

Notes:

• These functions are not supported when in the

iPod menu mode.

• The Random function set on the iPod or when

connected to iPod BB, remains the same after

attachment/ detachment of the iPod.

Note:

• See the iPod BB Owner’s Manual for details

regarding iPod BB connections and operation

conditions.

• The iPod BB can be set simultaneously for All

repeat and All random.

Connecting an iPod

1. Press the [OPTION] button.

When an iPod is connected to the iPod BB

interface, the “Repeat” set on the iPod will

become “All repeat play” instead. Likewise,

“Shuffle” set on the iPod will become as follows:

● Repeat play

Play back one track repeatedly.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

• “Shuffle (Albums)” play ➜ Random play

3. Push the [P.CH] button upward or downward

• “Shuffle (Songs)” play ➜ All random play

to select “ ”, and then press the [

button to perform repeat play.

]

The iPod BB interface has two modes, the “Play

mode” and the “iPod menu mode” for selecting

tracks. Switch between these modes by

pressing the [MENU] button.

● All repeat play

Repeatedly play all tracks within a selected

category.

2. Push the [SEEK PANEL] leftward or

Select iPod BB Interface

rightward to select “RPT”.

1. Press the [SRC] button.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

Playback will begin from the last file that was

played on the iPod alone or through the iPod

BB.

[

] button to perform all repeat play.

● Random play

Note:

Play all albums within a selected category, in

random order. (Corresponds to “Shuffle

(Albums)” command on iPod.)

• The following operations in Play mode operate

the same as in CD mode:

∗Track selection: [SEEK PANEL]

∗Fast-forward/fast-backward: [SEEK PANEL]

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

∗Pause: [

]

3. Push the [P.CH] button upward or downward

See “CD/MP3/WMA/AAC Operations” (page 27-

30) for details.

to select “ ”, and then press the [

button to perform random play.

]

● All random play

Play all tracks within a selected category, in

random order. (Corresponds to “Shuffle

(Songs)” command on iPod.)

2. Push the [SEEK PANEL] leftward or

rightward to select “RDM”.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

[

] button to perform all random

play.

DXZ778RUSB

iPod BB Operations

● To cancel the trick play

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT OFF” or “RDM

OFF”.

About title display

This unit supports the display of title information

transmitted from a connected iPod.

• Character code information is UTF-8;

displayable characters include English

alphanumerics, some symbols, and some

umlaut characters.

3. Press the [

] button.

Note:

• When the all repeat play mode is canceled,

playback will stop when all tracks have been

played.

• Unsupported characters will be replaced by

asterisks (*).

Selecting category from the iPod

1. Press the [MENU] button.

The iPod menu categories will be displayed.

2. Push the [P.CH] button upward or downward

to switch between categories.

The iPod menu categories alternate in the

following order:

“Composers” ↔ “Playlist” ↔ “Artists” ↔

“Albums” ↔ “Songs” ↔ “Genres” ↔

“Composers” ...

Note:

The iPod menu mode can be canceled by

performing the following operation:

• Press the [MENU] button.

3. Push the [SEEK PANEL] rightward to select

the category.

4. When the track name display is showing,

push the [SEEK PANEL] rightward.

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

∗ Subfolders may be displayed, depending on

the category.

In this case, push the [P.CH] button upward or

downward to switch between subfolders, then

push the [SEEK PANEL] rightward to select

the desired subfolder.

∗ When the track name display is showing,

pushing the [SEEK PANEL] leftward will

return to the currently playing folder name

display.

5. Push the [P.CH] button upward or downward

to select a track within a category.

6. Push the [SEEK PANEL] rightward to play

the desired track.

DXZ778RUSB

CD Changer Operations

Note:

Procedure to scroll a title

Set “AUTO SCROLL” to “ON” or “OFF”.

• The following operations are the same as for CD

mode:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Scan play

∗Repeat play

∗Random play

See “CD/MP3/WMA/AAC Operations” (page 27-

30) for details.

(The factory default setting is “ON”. Refer to the

subsection “Setting the method for title scroll”

in section “Operations Common to Each

Mode”.)

● When set to “ON”

The title is automatically kept scrolling.

● When set to “OFF”

To scroll just 1 time.

Note:

• User title can’t scroll.

CD changer functions

When an optional CD changer is connected

through the CeNET cable, this unit controls all

CD changer functions. This unit can control a

total of 2 changers.

Selecting a CD

1. Push the [P.CH] button upward or downward

to select a desired disc in the magazine.

Press the [SRC] button and select the CD

changer mode to start play. If 2 CD changers

are connected, press the [SRC] button to select

the CD changer for play.

∗ If “NO MAGAZINE” appears in the display, insert

the magazine into the CD changer. “DISC

CHECK” appears in the display while the player

loads (checks) the magazine.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

Note:

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

CAUTION

CD-ROM discs cannot be played from every

CD changer, it’s depended on the model.

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

1. Press and hold the [TITLE] button for 1

second or longer to display the title.

2. Press the [TITLE] button to change the title

display.

DXZ778RUSB

CD Changer Operations

● Disc random play

Other various play functions

The disc random play selects and plays

individual tracks or discs automatically in no

particular order. This function continues

automatically until it is cancelled.

● Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the

currently selected CD changer. This function

continues automatically until it is cancelled.

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

∗ Disc scan play is useful when you want to select a

desired CD.

rightward to select “RDM”.

3. Push the [P.CH] button upward or downward

1. Press the [OPTION] button.

to select “ALL”, and then press the

2. Push the [SEEK PANEL] leftward or

[

] button. “DISC RDM” appears in

rightward to select “SCN”.

the display and disc random play starts.

3. Push the [P.CH] button upward or downward

● To cancel the trick play

1. Press the [OPTION] button.

to select “ALL”, and then press the

[

] button. “DISC SCN” appears in

the display and disc scan play starts.

2. Push the [SEEK PANEL] leftward or

rightward to select “TRICK OFF”.

● Disc repeat play

3. Press the [

trick play.

] button to cancel the

After all the tracks on the current disc have been

played, disc repeat play automatically replays

the current disc over from the first track. This

function continues automatically until it is

cancelled.

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “RPT”.

3. Push the [P.CH] button upward or downward

to select “ALL”, and then press the

[

] button. “DISC RPT” appears in

the display and disc repeat play starts.

DXZ778RUSB

DVD Changer Operations

Note:

By connecting an optional DVD changer that

supports CeNET wiring, this unit can be used to

control the DVD changer. To view DVDs, an

optional monitor is required.

• The following operations are the same as for CD

and CD Changer modes:

∗Pause

∗Track selection

∗Fast-forward/fast-backward

∗Scan play

• The DVD control and display functions

supported by this unit are limited; the unit

does not support all the functions possible on

a DVD changer.

∗Repeat play

For fullest functionality, use the remote

control unit provided with your DVD changer

to control its operations. For details, consult

the Owner’s Manual provided with your DVD

changer.

∗Random play

See “CD/MP3/WMA/AAC Operations” (page 27-

30) and “CD Changer Operations” (page 39-40)

for details.

DXZ778RUSB

TV Operations

Note:

Setting the TV area

When you select the TV area (TV reception

area), the TV tuner area setting changes.

• The following operations are performed the same

as for radio mode:

∗Channel selection

∗Storing channels in memory

∗Calling channels from memory

∗Auto store

1. Press the [OPTION] button to switch to the

adjustment selection display.

2. Push the [SEEK PANEL] leftward or

rightward to select “TV AREA”.

∗Preset scan

See “Radio Operations” (page 21-22) for details.

3. Press the [

] button.

4. Push the [P.CH] button upward or downward

to select the reception area.

TV tuner functions

5. Press the [

] button to return to the

When an optional TV tuner is connected

through the CeNET cable, this unit controls all

TV tuner functions. To watch TV requires a TV

tuner and monitor.

adjustment selection mode.

6. Press the [OPTION] button to return to the

previous mode.

Setting the TV diver

You can change the reception setting for the TV

antenna connected to the TV tuner.

Watching a TV

1. Press the [SRC] button and select the TV

mode.

1. Press the [OPTION] button to switch to the

2. Press the [MENU] button to select the

desired TV band (TV1 or TV2). Each time

the button is pressed, the input selection

toggles between TV1 and TV2.

adjustment selection display.

2. Push the [SEEK PANEL] leftward or

rightward to select “TV DIVER”.

3. Push the [P.CH] button upward or downward

3. Push the [SEEK PANEL] leftward or

to set to “ON” or “OFF”.

rightward to tune in the desired TV station.

• ON:

Sets the diver setting to ON.

• OFF:

Sets the diver setting to OFF.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video

cassette recorder (VCR) to the TV tuner input

terminal.

4. Press the [OPTION] button to return to the

previous mode.

1. Press the [OPTION] button.

2. Push the [SEEK PANEL] leftward or

rightward to select “TV/VTR”.

3. Press the [

mode.

] button to enter the VTR

4. To return to the TV broadcast, press the

[OPTION] button.

5. Press the [

TV mode.

] button to return to the

DXZ778RUSB

Digital Radio / DAB Operations

DAB control function

Programme scan

When a CeNET cable is used to connect a DAB

(DAH923) (sold separately), all functions can be

operated.

This function scans through each receivable

programme in a DAB station being received for

10 seconds sequentially. This is useful when

you want to search for a desired programme.

1. Press the [SRC] button to receive a DAB

Listening to the DAB station

1. Press the [SRC] button to select the DAB

station.

2. Perform the following operation depending

on the connected model.

mode.

Notes:

Press the [OPTION] button. Push the [SEEK

PANEL] leftward or rightward to select

“SERVICE SCN”, and then press the

• The display shown in the normal reception mode

and the preset reception mode is the same as

that when a DAB station is received.

[

] button. “SERVICE SCN” appears

• The number of programmes and broadcasting

times depend on the DAB stations.

• When the strength of DAB signals is weak, audio

output is muted.

in the display and the unit starts scanning

each programme for 10 seconds

sequentially. Each time the main unit scans,

the programme name is shown in the

display.

Seek tuning

1. Press the [SRC] button to select the DAB

3. To stop programme scan when a desired

programme is tuned in.

mode.

Press the [

] button.

2. Push the [SEEK PANEL] leftward or

rightward and hold in position for 1 second or

longer.

Manual memory

“DAB” lights up in the display when the main

unit receives a DAB station.

∗ The main unit stops the seek tuning when it

cannot find a DAB station. The display returns

to the previous mode.

The main unit has a manual memory function

for DAB programmes. Up to 18 programmes (6

programmes each) can be preset in the preset

memory.

[M1], [M2] and [M3]

1. Press the [SRC] button to select the DAB

Manual tuning

mode.

1. Press the [SRC] button to select the DAB

2. Press and hold the [MENU] button for 1

second or longer to select manual tuning

mode.

2. Press and hold the [MENU] button for 1

second or longer. “MANU” lights up in the

display.

3. Push the [SEEK PANEL] leftward or

rightward to select a desired programme.

3. Push the [SEEK PANEL] leftward or

4. Press the [

] button to enter the

rightward to select a station.

preset memory mode.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

5. Push the [P.CH] button upward or downward

to select a desired programme. Press and

hold the [

longer to store the programme.

Note:

] button for 2 seconds or

Switching programmes

1. Press the [SRC] button to receive a DAB

• The interrupt programme (PTY or INFO) cannot

be written into a manual memory.

station.

2. Push the [SEEK PANEL] leftward or

rightward and hold in position for 1 second or

longer to switch programmes in the DAB

station.

Note:

• The programme name may be the same

depending on DAB programmes.

DXZ778RUSB

Digital Radio / DAB Operations

Recalling a preset programme

● Information select

This is a function for selecting INFORMATION

ON or OFF in the Information interrupt mode.

1. Press the [SRC] button to select the DAB

mode.

You can set ON up to 6 information items.

You can select any of the 6 items below:

INFORMATION item

2. Press the [MENU] button. Each time you

press the [MENU] button, the display

changes in the following order:

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

ContentsA

ENGLISHe

Transport flash

Warning / Service

News flash

3. Push the [P.CH] button upward or downward

Travelc

Warninga

Newsc

to recall a preset programme.

Weathera

Eventa

Speciala

Area weather flash

Event announcement

Special event

INFO (Announcement)

In the INFO standby mode, when the selected

announcement programme starts, the main unit

switches to the selected announcement

programme automatically.

1. Perform the following operation depending

on the connected model.

● Setting the INFO standby mode

Press the [OPTION] button.

If you press and hold the [TA] button for 1

second or longer, “INFO” lights in the display

and the main unit is set into the INFO standby

mode until the selected announcement is

broadcast. When the selected announcement

broadcast starts, the announcement item

appears in the display. If you press and hold the

[TA] button for 1 second or longer while the

selected announcement broadcast is being

received, the selected announcement broadcast

reception is cancelled and the main unit goes

into the INFO standby mode.

2. Push the [SEEK PANEL] leftward or

rightward to select “INFO SELECT”, then

press the [

] button to enter “INFO

SELECT” mode.

3. Push the [SEEK PANEL] leftward or

rightward to select an information item. You

can select any of 6 items:

Travelc➜ Warninga➜ Newsc➜ Weathera

➜ Eventa➜ Speciala➜ Travelc➜ ...

4. Push the [P.CH] button upward or downward

to set the information item for ON or OFF.

5. Press the [

] button to return to the

● Cancelling INFO standby mode

To cancel the INFO standby mode, press and

hold the [TA] button for 1 second or longer.

previous mode.

6. Press the [OPTION] button to return to the

previous display.

DXZ778RUSB

Digital Radio / DAB Operations

● AF function between RDS and DAB

When the same programme is broadcasted by

both RDS and DAB, and this function is ON, the

unit switches to receive the broadcast with the

better reception automatically.

For the following items, see “RDS

Operations” on page 23.

● AF function

∗ If the reception of the current broadcast station

deteriorates, “SEARCHING” appears in the

display and the radio searches for the same

programme on another frequency.

∗ This function only operates when the DAH923

DAB unit (sold separately) is connected.

● TA (Traffic Announcement)

● PTY

∗ The factory default setting is “ON”.

1. Press the [OPTION] button.

● Emergency broadcast

● Switching the PTY and INFO display

language

● Volume setting of TA, INFO emergency

broadcast (ALARM) and PTY

2. Push the [SEEK PANEL] leftward or

rightward to select “LINK ACT”.

3. Push the [P.CH] button upward or downward

to select “ON” or “OFF”.

• ON:

AF switching between DAB and RDS

enabled.

• OFF:

AF switching between DAB and RDS

disabled.

4. Press the [OPTION] button to return to the

previous mode.

DXZ778RUSB

7. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not

turn on.

Fuse is blown.

Replace with a fuse of the same amperage. If the

fuse blows again, consult your store of purchase.

(No sound is

produced.)

Incorrect wiring.

Consult your store of purchase.

No sound output Power antenna lead is

1. Turn the unit off.

when operating

the unit with

amplifiers or

power antenna

attached.

shorted to ground or

2. Remove all wires attached to the power antenna

lead. Check each wire for a possible short to

ground using an ohm meter.

excessive current is required

for remote-on the amplifiers

or power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the power

antenna lead one by one. If the amplifiers turn off

before all wires are attached, use an external relay

to provide remote-on voltage (excessive current

required).

Nothing happens The microprocessor has

Turn off the power, then press

Reset button

when buttons are malfunctioned due to noise, the [RELEASE] button and

pressed.

etc.

remove the DCP.

Press the reset button for about

2 seconds with a thin rod.

Display is not

accurate.

DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with

are dirty. cleaning alcohol.

No sound heard

The speaker protection circuit 1. Turn down sound volume. Function can also be

is operating.

restored by turning the power off and on again.

(Speaker volume is reduced automatically when

the speaker protection circuit operates).

2. If the sound is muted again, consult our service

department.

MP3/WMA/AAC files are

absent in a disc.

Write MP3/WMA/AAC files onto the disc properly.

Files are not recognized as

an MP3/WMA/AAC file.

Use MP3/WMA/AAC files encoded properly.

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo or

APPLE ISO file system.

Sound skips or is Compact disc is dirty.

Clean the compact disc with a soft cloth.

noisy.

Compact disc is heavily

Replace with a compact disc with no scratches.

scratched or warped.

Sound is cut or

skipped.

MP3/WMA/AAC files are not Use MP3/WMA/AAC files encoded properly.

encoded properly.

Noise is

generated or

noise is mixed

with sound.

Sound is bad

directly after

power is turned

on.

Water droplets may form on Let dry for about 1 hour with the power on.

the internal lens when the car

is parked in a humid place.

Wrong filename

File system is not correct.

Use ISO9660 level 1, 2 or JOLIET or Romeo or

APPLE ISO file system.

DXZ778RUSB

Problem

Cause

Measure

No sound heard. The USB memory device

Record MP3/WMA/AAC files properly to the USB

contains no MP3/WMA/AAC memory device.

files.

The files are not proper MP3/ Use only properly encoded MP3/WMA/AAC files.

WMA/AAC format.

Files are DRM copyright

protected.

See page 27 for details on how to cancel DRM

protection.

Connectors are loose.

Disconnect the USB memory device and reconnect

securely.

Sound is

The MP3/WMA/AAC files are Use only properly encoded MP3/WMA/AAC files.

interrupted or has improperly encoded.

noise.

USB memory

device isn’t

recognized.

The USB memory device is Disconnect the USB memory device and reconnect. If

damaged.

the device is still not recognized, try replacing with a

different USB memory device.

Connectors are loose.

Can’t insert USB The USB memory devices

Try reversing the connection direction of the USB

device (usually the brand name surface should be

facing left).

memory device.

has been inserted

improperly.

The USB connector is

broken.

Replace with a new USB memory device.

DXZ778RUSB

8. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

A CD is caught inside the CD This is a failure of CD deck’s mechanism and consult

deck and is not ejected. your store of purchase.

Measure

ERROR 3

ERROR 6

A CD cannot be played due Replace with a non-scratched, non-warped-disc.

to scratches, etc.

A CD is loaded upside-down Eject the disc then reload it properly.

inside the CD deck and does

not play.

ERROR 2

ERROR 3

A CD inside the CD changer This is a failure of CD changer’s mechanism and

is not loaded.

consult your store of purchase.

A CD inside the CD changer Replace with a non-scratched, non-warped disc.

cannot be played due to

scratches, etc.

ERROR 6

A CD inside the CD changer Eject the disc then reload it properly.

cannot be played because it

is loaded upside-down.

ERROR 2

ERROR 3

ERROR 6

A DISC inside the DVD

changer cannot be played.

This is a failure of DVD mechanism and consult your

store of purchase.

A DISC cannot be played due Retry or replace with a non-scratched, non-warped-

to scratches, etc.

disc.

A DISC inside the DVD

changer cannot be played

because it is loaded upside-

down.

Eject the disc then reload it properly.

ERROR P

ERROR R

ERROR 1

Parental level error

Region code error

Set the correct Parental level.

Eject the disc and replace correct region code disc.

Disconnect the iPod, then connect it again.

A communication error

occurs between the iPod and

the iPod CeNET Controller.

NO IPOD

ERROR 1

There is no iPod connected. Please connect the iPod.

Device mechanism is

damaged.

The unit’s mechanism may be damaged. Consult

your dealer.

NO FILE

USB memory device contains Insert USB memory device containing audio files.

no audio files.

DSP ERROR

USB connector is short-

circuited or USB memory

device is overloaded.

Disconnect USB memory device, then hold [SRC]

button depressed to turn power OFF. Then press

[SRC] button once again to turn power ON.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ778RUSB

9. SPECIFICATIONS

Radio section

General

Tuning System: PLL synthesizer tuner

Output Power: 4 ✕ 31 W (DIN 45324, +B=14.4V)

Receiving Frequencies:

Power Supply Voltage:

FM : 87.5 to 108 MHz (0.05 MHz steps)

MW : 531 to 1602 kHz (9 kHz steps)

LW : 153 to 279 kHz (3 kHz steps)

14.4 V DC (10.8 to 15.6 V allowable),

negative ground

Power Consumption: Less than 15 A

Speaker Impedance: 4 Ω (4 to 8 Ω allowable)

Weight:

CD player section

System: Compact disc digital audio system

Frequency Response: 5 Hz to 20 kHz ( 1 dB)

Signal to Noise Ratio: 100 dB (1 kHz)

Dynamic Range: 95 dB (1 kHz)

Distortion: 0.01%

Main unit: 1.6 kg

Remote control unit: 40 g (including battery)

Dimensions:

Main unit:

178 (W) ✕ 50 (H) ✕ 158 (D) mm

Remote control unit:

44 (W) ✕ 113 (H) ✕ 11 (D) mm

Note:

• Specifications and design are subject to change without notice for further improvement.

DXZ778RUSB

High-Tech High-Touch

» DICHIARAZIONE DI CONFORMITA’ «

(D.M. 28 agosto 1995, no548)

Io, Fabbricante / Mandatario nell’UE

Clarion Europa GmbH

Hessenring 19-21

64546 Mörfelden-Walldorf

Dichiaro che il prodotto

Autoradio con CD

DXZ778RUSB

conforme alle disposizioni contenute nel suddetto

decreto relativamente alla prevenzione e l’eleminazione

dei disturbi radioelettrici provocati dai ricevitori di

radiodiffusione sonora e televisiva.

Io, Fabbricante / Mandatario nell’UE

Data

21 Dicembre 2006

Clarion Europa GmbH

Hessenring 19-21

64546 Mörfelden-Walldorf

Firma

PBL No 06IRDC001C

IDCFMTFWLH002C

ꢀ

TEL :+49-6105-977-0

FAX :+49-6105-977-399

DXZ778RUSB

387

ꢀ

CE DECLARATION OF CONFORMITY

We Clarion Europa GmbH

ꢀ

(supplier's name)

Hessenring 19-21, 64546 Mörfelden-Walldorf, GERMANY

(address)

declare under our sole responsibility that the product

CAR RADIO with CD PLAYER

MODEL:

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ

DXZ778RUSB

Product code: PE2900

TYPE: 1043049

(name, type or model, possibly sources and numbers of items)

to which this declaration relates is in conformity with the following

standard(s) or other normative document(s)

EN 55013:2001 + A1, EN 55020:2002 + A1

(title and/or number and date of issue of the standard(s) or