Belkin BLUETOOTH HOT SYNC OPERATION T665C User Manual

Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin  
Bluetooth Hot Sync Operation for Sony Clie  
and PALM TungstenT  
Quick Setup Guide  
For Sony Clie Models: NZ90, Peg-TG50, T665c- using Palm OS  
Use with Belkin Bluetooth Adapters: F8T001, F8T002, F8T003  
Bluetooth Hot Sync Operation for Sony Clie and PALM TungstenT, by Belkin  
Section 4: Setting up the Bluetooth Hotsync Operation on the PC.  
1. Open you’re Bluetooth Neigborhood or Bluetooth Places on you’re PC.  
2. On the left side click on View my Bluetooth Services or on My Device.  
3. Right click on the Serial port and click on Properties.  
4. Make sure you have a check mark on Start up Automatically and uncheck  
Secure connection or Encryption and click on Apply.  
5. Get the Serial port number for an Example (Com port 3)  
Section 5: Setting up the Com port on the Palm Desktop Software.  
1. Right click on the Palm Icon on the Lower right corner of the Task Bar.  
2. Make sure that Local Serial is the only one checked.  
3. Click on Setup.  
4. Click on the Local Tab.  
5. On the Serial Port select the com port that was on Section 4 on number 5  
(Com port 3). The Speed leave as default, then click or Apply.  
Section 6: Performing the Hotsync Operation on the Sony Clie  
1. Tap the HotSync Icon on the Sony Clie.  
2. Tap on the Pull down error and select the connection that you created on like  
on Section 3 on number 5 (Belkin)  
3. Then Tap on the Hotsync Icon and should start performing a Hotsync  
Operation.  

Alpine cda 7873 User Manual
Alpine PDX F6 User Manual
Canon HI8 UC V10HI User Manual
Dell XLH1 User Manual
Eizo FORIS FS2331 User Manual
HANNspree 9 6" Liquid Crystal Display 12 1" Television User Manual
JBL GTO327 User Manual
JVC Camcorder GZ EX250 User Manual
JVC GET0701 002A User Manual
JVC GR SXM770A User Manual